Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 65 / 139

RS20i Installation and Operating Guide Page 65
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
4.3.2 Startup Input
The Startup input is the default input selection when the RS20i is powered up. Select any defined input
or
Last Input . Touch the drop down list to open it, then select the input.
Figure 41. Select Startup Input
4.3.3 Edit Inputs
Setup (System) > Inputs > Edit Inputs
Figure 42. Audio Input Edit Screen
ƒ
Copy Input – Use an existing Input as a template for a new one.
Select the audio input you wish to copy from by selecting it from the Copy Input From
drop down list. Then, touch the to Input box to bring up the virtual keyboard and enter a
name for the new input.
Press the
Copy button to complete the process, or press Cancel to quit.
ƒ
Copy Preset to Input – Select one of the pre-installed Inputs in your RS20i and use it as a
template for a new one. Select the input you wish to copy from by selecting it from the