Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 11 / 139

RS20i Installation and Operating Guide Page 11
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
Unpacking
The packaging is designed to handle normal shipping and handling. Upon receipt of shipment, check for
signs of damage before opening and report all damage to the carrier. All shipments made from Datasat
Digital Entertainment are the customer’s responsibility once they leave our premises.
Before installation begins, we suggest that a complete inventory be taken to minimize problems or
questions during installation. Additionally, save all packing material until installation is complete in the
unlikely event that a component(s) requires return to the factory. Use the packing slip that came with
your unit to verify received inventory.
The following is a standard packing list for the RS20i Audio Processor:
Table 1. RS20i Standard Packing Kit
ITEM KEY ITEM DESCRIPTION QTY
2501000100 Power cord, straight detachable, (17250) standard Volex 17250 10 B1 blk.
Note: International power cords may also be included, as needed. 1
9003E11901 Screw Kit, Rack, Truss head screw & Washer (E119-01) 1
9003H56400 Fuse Kit, 115V 1
9003H56401 Fuse Kit, 230V 1
9020H51900 Cable assembly, Analog out to XLR 2
9120H56000 Rack Ears 2
9303H52800 Release notes, RS20i software 1
9303H561M0 Tech note, RS20i Input voltage setting and fuse replacement 1
9306H565M0 Legal notice, RS20i Software License 1
9306F42200 Legal notice, WEEE Compliance 1
9331H52900 Disc, Manual, RS20i Installation and Operation 1
Caution Notices
Warning: Before powering on the RS20i for the first time, verify that the correct input voltage
has been selected at the rear panel power entry module. An incorrect input voltage setting will
damage the RS20i. See section 2.5.3.
Power Cord to the RS20i rear panel: The power cord is the main disconnect device. It should
be plugged into an easily accessible outlet with surge protection. The power cord is to be used
in a minimum type SVT 18/3 rated 250 Volts AC, 10 Amps with a maximum length of 4.5 M,
with one end terminated in an IEC 320 attachment plug and the other end terminated in a NEMA
5-15P Plug.
Battery: The RS20i contains a battery on the front panel PC board that is not field replaceable.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.