Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 112 / 139

RS20i Installation and Operating Guide Page 112
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
4.5.1.1.2. Event Type
When an event is first added the event type defaults to “No Event”, this means the event
type is not configured and should be replaced with one of the other event types.
ƒ
GPI – Configure an input event
When GPI is selected, an input may be configured to run either a single action or a macro
when it receives a signal.
Figure 85. Automation Edit Event Screen - GPI
Select an input (GPI-1 thru 18 or Projector) from the dropdown list. Select the signal
(Low or High). Select an Action or a Macro to run. If Macro is selected, choose a macro
from the dropdown list. If Action is selected, touch the white box that appears below it.
This will bring up the Automation Edit Action screen.
Figure 86. Automation Edit Action screen
Execute:
o Always – The action is always executed.