Datasat RS20i, Инструкция по установке и эксплуатации

Страница: 16 / 139

RS20i Installation and Operating Guide Page 16
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.00
When the home screen appears, the RS20i is ready.
Figure 4. Home Screen
5
Note: If no image appears on the touch screen after you have turned on the power switch, check the
following:
ƒ
Is the power to the equipment rack on? Has the circuit breaker to the audio rack been
tripped?
ƒ
Is the power cable connected?
ƒ
Is the front panel power switch lighted?
ƒ
Have the fuses blown? (Note: Check that the voltage input setting on the rear panel power
entry module has been set correctly for either 115VAC or 230VAC).
Navigating through the Menus
Since the RS20i is equipped with a touch screen display, you can navigate easily through the menus by
touching any button with your finger. A non-abrasive stylus that will not scratch the screen can also be
used if you prefer.
In all screens but the Home screen, you will be presented with a button menu along the bottom of the
screen. This menu will take you to any other screen within the menu structure with a few touches of
your finger.
If the following symbol appears on the screen, it indicates that the front panel adjustment knob may be
used as a navigation tool (usually to scroll through a list or to increase/decrease values):