DataKinetics DSC110 / DSC210 User Manual Issue 12
Page 91
7.16.11 Configuration Monitor End
CNMOE
Configuration Monitor End
This command ends the monitoring of an object. An object is currently only an
signalling link.
Prerequisites
The C7LINK or ASLINK is being monitored.
Syntax CNMOE:{[ASLINK=]|[C7LINK=]};
Attributes CONFIG
Example CNMOE:ASLINK=1;
7.16.12 Configuration Monitor Print
CNMOP
Configuration Monitor Print
This command is used to obtain a print out of the objects being monitored. An
object is currently only a signalling link.
For signalling the STS will monitor information sent from the EQU of the signalling
link and the RTS will monitor information received by the signalling link.
Syntax
CNMOP;
Attributes None
Example CNMOP;
Output format
Monitoring Configuration
ASLINK C7LINK STS RTS
1 19-1-1 19-1-2
3 19-1-3 19-1-4
EXECUTED
