DataKinetics DSC110 / DSC210 User Manual Issue 12
Page 49
ENC
Parameter Encapsulation
See section 7.11.17 for a description of
this parameter.
Y,N
Default = N
END
Specifies which end the access
signalling is acting as (either Network
or User for Q931/NI2 or A or B for
DPNSS).
N,U,A,B
EQU
Signalling processor hardware
identifier, format x-y
x = board position (BPOS)
y = signalling processor
x: 5:20
y: 1:2
FF
PCM frame format:-
G704 – Normal E1 format described in
G.704.
CRC4 – Normal E1 format with CRC4
checksum generation.
CRC4C - Normal E1 format with CRC4
checksum generation. Is compatible
with non CRC4 operation.
SF – 12 frame multiframe (D3/D4).
ESF – 24 frame multiframe.
CRC6 – ESF format with CRC6
checksum generation.
SLC96 – 72 frame multiframe.
F4 – 4 frame multiframe.
G704,
CRC4,
CRC4C
SF,
ESF,
CRC6,
SLC96,
F4
Default =
G704 for an
E1 on a board
of SIGTYPE
SS7, DPNSS
or NONE.
CRC4 for an
E1 on a board
of SIGTYPE
Q931/ISDN.
ESF for a T1
on a board of
SIGTYPE
ISDN
SF for a T1 on
a board of
SIGTYPE SS7
FILE
File name on a remote data centre.
0:12<text
character>
GATEWAY
The default IP gateway used to reach
other networks when the destination is
not on the local sub-net. Specified
using dot notation: www.xxx.yyy.zzz
www-0:255
xxx – 0:255
yyy – 0:255
zzz – 0:255
Default =
0.0.0.0
HTSEQ
Hunt sequence number used for
associating circuit groups with routes
such that hunting takes place in certain
order.
1:32
HUNT
The hunting algorithms used for
searching for the next outgoing circuit.
The algorithms are specified in Section
7.11.4.
0:9,
Default = 0
IBI
In-band information mode
0 – No action
1- Generate an inband indication in the
first backward message.
0:1
Default = 0
