There is one pedestal that fits both frames D1 and D2. Its ordering number is 176F1827. The pedestal is standard for an E1 frame.
Required Tools:
•
Socket wrench with 0.28-0.67 in (7–17 mm) sockets
•
T30 Torx Driver
Torques:
•
M6 - 4.0 Nm (35 in-lbs)
•
M8 - 9.8 Nm (85 in-lbs)
•
M10 - 19.6 Nm (170 in-lbs)
Kit Contents:
•
Pedestal parts
•
Instruction Manual
Figure 3.29: Mount the drive onto pedestal.
Install the pedestal on the floor. Fixing holes are to be drilled according
to this figure:
Figure 3.30: Drill master for fixing holes in floor.
Mount the drive on the pedestal and using the enclosed bolts, attach it
to the pedestal, as shown in the illustration.
Figure 3.31: Mounting the drive to the pedestal
VLT
®
Automation Drive FC 300
Instruction Manual High Power
3 How to Install
MG.33.U2.22 - VLT
®
is a registered Danfoss trademark
3-31
3