Daikin RXSQ24TAVJU, Руководство по обслуживанию, Страница: 109 / 311

SiUS331708EA Field Settings from Remote Controller
Field Settings and Test Operation 96
Note that the control is automatically switched to the one performed only by the suction air thermistor for indoor
unit when the Second code No. is
01 during group control.
To use the remote controller thermistor during group control, select the Second code No. 02 in First code No. 6 .
Note: When the 10(20)-6 setting is changed to 02 , several indoor units are controlled by one remote
controller thermistor, so note that the room temperature might be uneven.
Filter Cleaning Sign
Whether or not to display "Filter Cleaning" after operation of certain duration can be selected.
∗
Filter cleaning sign is not displayed when an Auto-clean Panel is connected.
Information for intelligent Touch Manager / intelligent Touch Controller (for FXZQ-TA and FXSQ-TA models)
∗
When field setting 10 (20)-6- 02 is set at the same time as 10 (20)-2- 01,02,03, field setting 10 (20)-2 has priority.
When field setting 10 (20)-6- 01 is set at the same time as 10 (20)-2- 01,02,03, field setting 10 (20)-6 has priority
for group connection, and 10 (20)-2 has priority for individual connection.
Time for Absence Area Detection
(For units with the infrared presence/floor sensor only)
By selecting the energy-saving operation mode in the absence, the target temperature is shifted to the energy-
saving end by 1°C (maximum 2°C) after the state of absence continues for a certain period of time.
Absent time defined for detection can be selected as follows:
• The set temperature displayed on the remote controller remains same even if the target temperature is shifted.
• As soon as people is detected while the temperature is shifted, this control will be cancelled (reset).
Mode No. First Code No. Second Code No. Contents
10 (20) 6
01 Remote controller thermostat control is not permitted during group control.
02 Remote controller thermostat control is permitted during group control.
Mode No. First Code No. Second Code No. Contents
10 (20) 3
01 Displayed
02 Not displayed
Mode No. First Code No. Second Code No. Contents
10 (20) 5
01
Only indoor unit sensor value (or remote controller
sensor value, if installed.)
02 Sensor values according to 10 (20)-2 and 10 (20)-6.
Mode No. First Code No. Second Code No. Contents
10 (20) 7
01 30 minutes
02 60 minutes
30 (60)
∗
60 (120)
∗
31
19
28
27
26
17
21
30
29
20
18
Elapsed time of absence (min.)
Set temperature (˚C)
Human detection
Cooling (at 28˚C)
Heating (at 20˚C)
State of absence
∗
The values in parentheses represent the time
when Second code No. is "02."