Daikin MCKB70YSAU, Руководство по установке и эксплуатации

Страница: 11 / 42

10
English
Read First
HUM monitor lamp about ambient humidity (white) (rough estimate)
Indicates room humidity within the range 20% to 90%.
(1% increments)
When the humidity level is below 20%, “20” is displayed, and when
the humidity level is above 90%, “90” is displayed.
• The lamp will light up even when only the Air Purifying Operation is
active.
• [– –] is displayed for about 30 seconds immediately after operation
start regardless of the humidity.
At times the humidity level indicated on the unit may differ
from other hygrometers.
• This is because the flow of air causes temperature and humidity
to vary throughout the room. Please consider the indications to
be a rough estimate of ambient humidity.
States of the HUM monitor lamp and their meanings ►
Page 33
Odor sensor lamp
Indicates the intensity of odors in 3 colors: blue, orange, red.
• Blue indicates that the air is clean.
Blue Orange Red
Low
High
Lamp
color
Odors
„
If operation is started immediately after the power
supply plug is inserted, the lamp will light blue for the
first 1 minute (approx.).
„
If odor intensity levels are unchanging, the sensor may not
respond even if there is a strong odor in the air.
„
The following types of odors may not be detected: pet
odors that do not include ammonia, garlic odors, etc.
„
As odor perception varies by person, in some cases an
odor may be sensed even when the lamp is blue.
If the odor bothers you, switch to manual airflow rate, and
select a high airflow rate.
►
Page 17
The basic sensitivity of the odor sensor will be determined by odor
levels in the first 1 minute after the power supply plug is inserted.
Insert the power supply plug when the air is clean (odor-free).
01_EN_3P672685-2A.indd 10 2021/12/13 13:55:54