9
Read First
Names of Parts and Operations
Water supply lamp (Red)
• When water in the water tank is depleted during
Humidifying Operation, a tone (3 long beeps) will sound
and the lamp will light up.
•
Stop operation, unplug the power supply plug, and then fill
the water tank with water.
►
Page 14, 15
•
To stop the notification tone (3 long beeps) from sounding,
change the setting.
►
Page 23, 24
• If 3 long beeps sound and the lamp lights up even though
water is in the water tank.
►
Page 36
Operations and operating status
will be notified by tones.
• Operation start ................. 2 quick beeps
• Setting change ................. 1 short beep
• Operation end .................. 1 long beep
• Filter replacement reset ... 2 short beeps
• When not usable .............. 3 short beeps
•
Notification
....................... 3 long beeps
Filter replacement lamp (orange)
Lights up approx. 1 month before the dust collection filter
needs to be replaced, and blinks when it is time to replace
the dust collection filter.
Operating/Indicator panel
Dust/Particle sensor lamp
Indicates the volume of dust in 3 colors: blue, orange, red.
• Blue indicates that the air is clean.
Blue
Orange
Red
Low
High
Lamp
color
Dust
•
The dust/particle sensor can detect large dust (approx. 2.5μm and
above) and small particles (approx. 1.0-2.5μm). The particle lamp
lights in response to small particles and the dust lamp lights in
response to large dust particles.
After operation is started, the lamp will light blue for
the first 1 minute (approx.) regardless of air impurity
level.
If the responsiveness of the dust/particle sensor is poor,
change the sensitivity setting of the sensor.
►
Page 21, 22
The responsiveness of the dust/particle sensor may be
poor when airflow rate is high such as “Turbo”. This is not a
malfunction because the airflow rate is strong and the dust
is sucked into the air inlet before it reaches the dust/
particle sensor.
01_EN_3P672685-2A.indd 9
2021/12/13 13:55:54
Содержание MCKB70YSAU
Страница 2: ...1...
