Daikin Hubbard GCU2040PXB1, Инструкция по установке, пусконаладке и обслуживанию

Страница: 108 / 172

59
ENG
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Mask index Display description Description Def . U . of M . V alues
Bbb06 Oil cool. pump
Force to
Manual request for oil cooling pump (line 1)
0.0 % 0.0…100.0
Bbb07 Compressor 1
Force to
Manual request for continuous capacity for compressor 1 (line 2)
0.0 % 0.0…100.0
Bbb08 Oil cool. pump
Force to
Manual request for oil cooling pump (line 2)
0.0 % 0.0…100.0
Bbb09 Fan 1
Force to
Manual request for continuous capacity for fan 1 (line 1)
0.0 % 0.0…100.0
Bbb10 Heat recovery pump
Force to
Manual request for heat recovery pump (line 1)
0.0 % 0.0…100.0
Bbb11 Fan 1
Force to
Manual request for continuous capacity for fan 1 (line 2)
0.0 % 0.0…100.0
Bbb12 Heat recovery pump
Force to
Manual request for heat recovery pump (line 2)
0.0 % 0.0…100.0
Bbb75 --- Discharge pressure probe position (line 2) --- --- U1…U10 (****)
--- Discharge pressure probe type (line 2) 4...20mA --- ----, 0-1V
0-10V
4...20mA
0-5V
--- (display only) Discharge pressure value (line 2) --- … …(**)
Max limit Maximum discharge pressure value (line 2) 44.8 barg … …(**)
Min limit Minimum discharge pressure value (line 2) 0.0 barg … …(**)
Calibrat. Common oil receiver pressure probe calibration (line 2) 0.0 barg … …(**)
Bc01 Test DO Enable DO test mode NO --- NO | YES
Timeout Duration of test mode after last key pressed 10 min 0…500
Bc02 Test AO Enable AO test mode NO --- NO | YES
Timeout Duration of test mode after last key pressed 10 min 0…500
Bca10 DO1 DO 1 test logic NO --- NO | NC
--- DO 1 test value OFF --- OFF | ON
… … … … … …
Bca26 D29 DO 29 test logic NO --- NO | NC
--- DO 29 test value OFF --- OFF | ON
Bcb10 AO1 AO 1 test value 0.0 --- 0.0…100.0
… … … … … …
Bcb12 AO6 AO 6 test value 0.0 --- 0.0…100.0
Tab. 7.c
Mask index Display description Description Def . U . of M . V alues
C.CompressorS
The I/Os depend on the confi guration selected, the following are only examples. See Appendix A.1 for the complete list and position of available I/Os.
Caa01
DI Alarm 1 compressor 1 DI position (line 1) 03 --- --- | 01…18 |
U1…U10 (****)
Status (display only) Status Alarm 1 compressor 1 DI (line 1) --- --- closed | open
Logic Logic alarm 1 compressor 1 DI (line 1) NC --- NC | NO
Function (display only) Alarm 1 compressor 1 function status (line 1) --- --- not active | active
… … … … … …
Caa08 Line relay DO Compressor 1 line DO position and status (On/Off ) display (line 1) … --- ---, 01…18 (****)
Part winding DO/Star relay
DO (*) Compressor 1 part winding/star DO position and status (On/Off ) display
(line 1) … --- ---, 01…18 (****)
---/Delta relay DO (*) Compressor 1 DO position and status (On/Off ) display (line 1) … --- ---, 01…18 (****)
Logic Logic for compressor 1 power supply DO (line 1) NC --- NC | NO
Caa09 DO Compressor 1 unloader 1 DO position (line 1) … --- ---, 01…18 (****)
Status (display only) Status for compressor 1 unloader 1 DO (line 1) --- --- closed | open
Logic Logic for compressor 1 unloader 1 DO (line 1) NC --- NC | NO
Function (display only) Compressor 1 unloader 1 function status (line 1) --- --- not active | active
… … … … … …
Caa14 AO Compressor modulating device AO position (line 1) 0 --- ---, 01…06 (****)
Status (display only) Modulating device output value (line 1) 0 % 0.0…100.0
… … … … … …
Caaal --- Suction pressure probe position (Line 1) B1 --- --- | U1…U10 (****)
--- Suction pressure probe type (Line 1) 4...20 mA --- ----
0-1 V
0-10 V
4...20 mA
0-5 V
--- (display only) Suction pressure value (line 1) --- … …(**)
Max limit Suction pressure maximum value (line 1) 44.8 barg … …(**)
Min limit Suction pressure minimum value (line 1) 0.0 barg … …(**)
Calibrat. Suction pressure probe calibration (Line 1) 0.0 barg … …(**)
… … … … … …
Cab01 Regulation Compressor control by temperature or pressure (line 1) pressure --- pressure
temperature
Reg. Type Compressor regulation type (line 1) dead zone --- proportional Band
dead Zone
Cab02 Minimum Compressor setpoint lower limit (line 1) 0.0 barg … …(**)
Maximum Compressor setpoint upper limit (line 1) 40.0 barg … …(**)
Cab03 Setpoint Compressor setpoint (line 1) 26.0 barg … …(**)
Cab04/Cab6 (**) Reg. Type Proportional regulation type (line 1) proporz. --- proportional /
pint.
Integral time Integral time for proportional regulation (line 1) 300 s 0…999
Cab05/Cab7 (**) Diff erential Diff erential for proportional regulation (line 1) 0.5 barg … …(**)
Cab08/Cab10 (**) NZ diff . Dead zone regulation diff erential (line 1) 0.5 barg … …(**)
Activ.diff . Dead zone regulation diff erential for device activation (line 1) 0.7 barg … …(**)
Deact.diff . Dead zone regulation diff erential for device deactivation (line 1) 0.7 barg … …(**)
Cab09/Cab11 (**) En.force off Enable capacity immediate decreasing to 0 (line 1) NO --- NO | YES
Setp. force off Threshold for capacity decreasing to 0 (line 1) 0.0 barg … …(**)
Cab12 Power to 100%
min time Minimum time to increase capacity request to 100%, dead zone regulation
(suction line 1) 15 s 0…9999
Power to 100%
max time Maximum time to increase capacity request to 100%, dead zone regulation
(suction line 1) 90 s 0…9999
Page 108 of 172
Copyright HPL March 2021 P4114S Rev 03