Daikin Hubbard GCU2040PXB1, Инструкция по установке, пусконаладке и обслуживанию

Страница: 117 / 172

68
ENG
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Mask index Display description Description Def . U . of M . V alues
Efb09 High alarm High alarm enabling for generic modulating function 1 disable --- disable | enable
High alarm High alarm threshold for generic modulating function 1 0.0 °C … … (**)
Delay High alarm delay for generic modulating function 1 0 s 0…9999
Alarm type Low alarm type for generic modulating function 1 Normal --- Normal | Serious
Efb20 Low alarm Low alarm enabling for stage 1 generic function Disable --- disable | Enable
Low alarm Low alarm threshold for stage 1 generic function 0.0 °C … … (**)
Delay Low alarm delay for stage 1 generic function 0 s 0…9999
Alarm type Low alarm type for stage 1 generic function Normal --- Normal | Serious
Efb10 Out upper limit Output upper limit for generic modulating function 1 100.0 % 0…100
Out lower limit Output lower limit for generic modulating function 1 0.0 % 0…100
Cut-off enable Enable cut-off function for generic modulating function 1 NO --- NO | YES
Cutoff Diff Cut-off diff erential for generic modulating function 1 0.0 °C … … (**)
Cutoff hys. Cut-off hysteresis for generic modulating function 1 0.0 °C … … (**)
… … … … … …
Efb15 Out upper limit Output upper limit for generic modulating function 1 100.0 % 0…100
Out lower limit Output lower limit for generic modulating function 1 0.0 % 0…100
Cut-off enable Enable cut-off function for generic modulating function 1 NO --- NO | YES
Cutoff Diff Cut-off diff erential for generic modulating function 1 0.0 °C … … (**)
Cutoff hys. Cut-off hysteresis for generic modulating function 1 0.0 °C … … (**)
… … … … … …
Efc05 JAN Alarm 1 Enable generic alarm function 1 disable --- disable | Enable
JAN Alarm 2 Enable generic alarm function 2 disable --- disable | Enable
Efc06 Regulation variable Monitored variable for generic alarm function 1 --- --- …
Enable Enabling variable for generic alarm function 1 --- --- …
Description Enable description change Salta --- Skip | Change
--------------- Description --- --- …
Efc07 Alarm type Priority type for generic alarm function 1 Normal --- Normal | Serious
Delay Delay for generic alarm function 1 0 s 0…9999
… … … … … …
Efd05 Enable generic
scheduler funct. Enable generic scheduler function disable --- disable | enable
JAN. scheduling connected
to common scheduler Generic scheduler with the same days and special periods NO --- NO | YES
Efd06 Enable Enabling variable for generic scheduler function --- --- …
Efd07 TB1: --:-- -> --:-- Enabling and defi nition of time band 1: start hour and minute, end hour and minute
(suction line 1) --- … …
… … … … …
TB4: --:-- -> --:-- Enabling and defi nition of time band 4: start hour and minute, end hour and minute
(suction line 1) --- … …
Change Time band change action --- --- ---
save changes
load previous
clear all
Copy to Copy settings to other days 0 --- MONDAY...SUNDAY;
MON-FRI; MON-SAT;
SAT&SUN; ALL
Efe05 JAN. A measure Generic analog input A unit of measure selection °C --- °C | °F | barg |
psig | % | ppm
… … … … …
Efe06/Efe07 (**) --- Generic probe A position B1 --- ---, U1…U10 (****)
--- Generic probe A type 4...20 mA --- …(**)
--- (display only) Generic probe A value --- … …(**)
Max limit Generic probe A maximum limit 30.0 barg … …(**)
Min limit Generic probe A minimum limit 0.0 barg … …(**)
Calibration Generic probe A calibration 0.0 barg … …(**)
… ... ... … … …
Efe21 DO Generic stage 1 DO position … --- ---, 01…18 (****)
Status (display only) Status of generic stage 1 DO --- --- closed | open
Logic Logic of generic stage 1 DO NO --- NC | NO
Function (display only) Generic stage 1 function status --- --- not active | active
… … … … … …
Efe29 Modulating1 Generic modulating 1 AO position 0 --- ---, 01…06 (****)
Status (display only) Generic modulating 1 function output value 0 % 0.0…100.0
… … … … … …
Egaa01 DI ChillBooster fault DI position (line 1) --- --- ---, 01…18, U1…
U10 (****)
Status ChillBooster fault DI status (line 1) --- --- closed | open
Logic ChillBooster fault DI logic (line 1) NC --- NC | NO
Function ChillBooster fault function status (line 1) --- --- not active | active
Egaa02 DO ChillBooster fault DO position (line 1) … --- ---, 01…18 (****)
Status (display only) ChillBooster fault DO status (line 1) --- --- closed | open
Logic ChillBooster fault DO logic (line 1) NO --- NC | NO
Function (display only) ChillBooster function status (line 1) --- --- not active | active
Egab01 Device present Enable ChillBooster function (line 1) NO --- NO | YES
Deactivation when
fan power less than Fan capacity under which the ChillBooster is deactivated (line 1) 95 % 0…100
Egab02 Before activ. fans at
max for Min. time for fans at maximum capacity before ChillBooster activation (line 1) 5 min 0…300
Ext.tempThresh External temperature threshold for ChillBooster activation (line 1) 30.0 °C … …(**)
Egab03 Sanitary proc. Enable sanitary procedure (line 1) Disable --- disable | Enable
Start Sanitary procedure starting time (line 1) 00:00 --- …
Duration Sanitary procedure duration (line 1) 0 min 0…30
Ext.tempThresh External temperature threshold for sanitary procedure activation (line 1) 5.0 °C … …(**)
Egab04 Maint. req. Chillb. after Tempo massimo funzionamento ChillBooster (linea 1) 200 h 0…999
Maint time reset Reset tempo funzionamento ChilllBooster (linea 1) NO --- NO | YES
Ehb01 Avoid simultaneous pulse
between lines Abilitazione inibizione spunti contemporanei compressori NO --- NO | YES
Delay Ritardo tra partenze compressori linee diverse 0 s 0…999
Ehb03 Force3 off L2 comps
for L1 fault Abilitazione forzatura OFF compressori linea 2 per guasto compressori linea 1 NO --- NO | YES
Delay Ritardo forzatura OFF compressori linea 2 per guasto compressori linea 1 0 s 0…999
Ehb04 Activ. L1 comps for
L2 activ. Abilitazione forzatura ON compressori linea 1 per accensione compres. linea 2 NO --- NO | YES
Delay Ritardo forzatura ON compressori linea 1 per accensione compressori linea 2 30 s 0…999
Force off L2 comps for L1 off Abilitazione forzatura OFF compressori linea 2 per off linea 1 NO --- NO | YES
Ehb05 Enable minimum threshold
for act. of L1 Enable line 1 activation for DSS only when the suction pressure is greater than a minimum
threshold NO --- NO | YES
Threshold Minimum threshold for line 1 activation for DSS --- … … (**)
Page 117 of 172
Copyright HPL March 2021 P4114S Rev 03