Daikin Hubbard GCU2040PXB1, Инструкция по установке, пусконаладке и обслуживанию

Страница: 120 / 172

71
ENG
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Mask index Display description Description Def . U . of M . V alues
… … … … … …
Ecba01 --- Discharge temperature probe position, compressor 1 (line 2) B1 --- --- | U1…U10 (****)
--- Discharge temperature probe type, compressor 1 (line 2) 4...20 mA --- --- | NTC | PT1000
0...1 V | 0...10 V |
4...20 mA | 0...5 V |
HTNTC
--- (display only) Discharge temperature value, compressor 1 (line 2) --- … …(**)
Max limit Discharge temperature maximum value, compressor 1 (line 2) 30.0 barg … …(**)
Min limit Discharge temperature minimum value, compressor 1 (line 2) 0.0 barg … …(**)
Calibration Discharge temperature probe calibration, compressor 1 (line 2) 0.0 barg … …(**)
… … … … … …
Ecbb04 Economizer Enable economizer function (line 2) NO --- NO | YES
Comp.Power Thresh. Capacity percentage threshold for economizer activation (line 2) 0 % 0…100
Cond.Temp.Thresh. Condensing temperature threshold for economizer activation (line 2) 0.0 °C … -999,9…999,9
Discharge Temp.Thresh. Discharge temperature threshold for economizer activation (line 2) 0.0 °C … -999,9…999,9
… … … … … …
Edba01 --- Discharge temperature probe position, compressor 1 (line 2) B1 --- ---, U1…U10 (****)
--- Discharge temperature probe type, compressor 1 (line 2) 4...20mA --- --- | NTC | PT1000
| 0...1 V | 0...10 V |
4...20 mA | 0...5 V |
HTNTC
--- (display only) Discharge temperature value, compressor 1 (line 2) --- … …(**)
Max limit Discharge temperature maximum value, compressor 1 (line 2) 30.0 barg … …(**)
Min limit Discharge temperature minimum value, compressor 1 (line 2) 0.0 barg … …(**)
Calibration Discharge temperature probe calibration, compressor 1 (line 2) 0.0 barg … …(**)
… … … … … …
Edbb01 Liquid inj. Enable liquid injection function (line 2) Disabled --- Disabled | abled
Threshold Liquid injection setpoint (line 2) 70.0 °C … … (**)
Diff erential Liquid injection diff erential (line 2) 5.0 … … (**)
… … … … … …
Eeba02 DI Heat recovery from digital input DI position (line 2) … --- ---, 01…18, U1…
U10 (****)
Status Heat recovery from digital input DI status (line 2) --- --- closed | open
Logic Heat recovery from digital input DI logic (line 2) NC --- NC | NO
Function Heat recovery from digital input function status (line 2) --- --- not active | active
Eebb01 Enable heat rec. Enable heat recovery function (line 2) NO --- NO | YES
… … … … … …
Egba01 DI ChillBooster fault DI position (line 2) --- --- --- | 01…18
U1…U10 (****)
Status ChillBooster fault DI status (line 2) --- --- closed | open
Logic ChillBooster fault DI logic (line 2) NC --- NC | NO
Function ChillBooster fault function status (line 2) --- --- not active | active
… … … … … …
Egbb01 Device present Enable ChillBooster function (line 2) NO --- NO | YES
Deactivation when fan power
less than Fan capacity under which the ChillBooster is deactivated (line 2) 95 % 0…100
… … … … … …
Tab. 7.f
Mask index Display description Description Def . U . of M . V alues
F.settings
Faaa01 Summer/Winter Enable summer/winter management NO --- NO | YES
Special days Enable special days management NO --- NO | YES
Closing per. Enable closing period management NO --- NO | YES
Faaa02 Start Summer start date --- --- 01 | JAN…31 | DEC
End Summer end date --- --- 01 | JAN…31 | DEC
Faaa03 Day 1 Special day 1 date --- --- 01 | JAN…31 | DEC
… … … … … …
Faaa04 Day 10 Special day 10 date --- --- 01 | JAN…31 | DEC
Faaa05 P1 P1 closing period start date --- --- 01 | JAN…31 | DEC
--- P1 closing period end date --- --- 01 | JAN…31 | DEC
… … … … …
P5 P5 closing period start date --- --- 01 | JAN…31 | DEC
--- P5 closing period end date --- --- 01 | JAN…31 | DEC
Faab01 Date format Date format DD/MM/
YY --- ----
DD | MM | YY
MM | DD | YY
YY | MM | DD
Faab02
Faab03
Faab04 Hour Hour and minutes … … …
Date Date … … …
Day (display only) Day of the week calculated from the date … … Monday… Sunday
Faab05 Daylight savings time Enable daylight savings time disable --- disable | enable
Transition time off set time 60 --- 0…240
Start Daylight savings time starting week, day, month and time … … …
End Daylight savings time ending week, day, month and time … … …
Fb01 Language Current language english --- …
Fb02 Disable language mask at
startup Disable the change language screen at startup YES --- NO | YES
Countdown Starting value for countdown, time change language screen active 60 s 0…60
Fb03 Main mask selection Main screen selection Linea 1 --- Line 1 | Line 2
Double suction |
Double cond.
Fb04 Probes Confi guration Enable main screen confi guration in terms of probes and values displayed don’t
confi gure --- confi gure |
don’t confi gure
Info Confi guration Enable main screen confi guration in terms of icons displayed don’t
confi gure --- confi gure |
don’t confi gure
Fb05* *refers
to double
lines and GC
confi guration at
the start-up L1 - Suction Suction pressure L1 L1 - Suction barg main probes available
L2 - Suction Suction pressure L2 L2 - Suction barg main probes available
[Empty] Free to display new value [Empty] --- main probes available
GC out temp Gas cooler outlet temperature GC OUT
temp °C/°F main probes available
Gas cool. Gas cooler pressure Gas cool. barg main probes available
Fb09 I1% value Activation status of fi rst control value L1 - Compr % main status available
I2% value Activation status of second control value L2 - Compr % main status available
Fb10 I3% value Activation status of fi rst control value L1 - Fans % main status available
I4% value Activation status of second control value HPV % main status available
Page 120 of 172
Copyright HPL March 2021 P4114S Rev 03