Daikin Hubbard GCU2040PXB1, Инструкция по установке, пусконаладке и обслуживанию

Страница: 103 / 172

54
ENG
pRack PR300T +0300018EN rel. 1.5 - 02.05.2017
Mask index Display description Description Def . U . of M . V alues
A. Unit status
Aa01 (display
only) Pressure Suction pressure (line 1) --- … …(**)
Sat.Temp. Suction saturated temperature (line 1) --- … …(**)
ActualSet Actual setpoint for pressure regulation (with compensations applied, line 1) --- … …(**)
Diff eren. Regulation diff erential for pressure regulation (line 1) --- … …(**)
Aa02 (display
only) Pressure Suction pressure (line 1) --- … …(**)
Sat.Temp. Suction saturated temperature (line 1) --- … …(**)
ActualSet Actual setpoint for temperature regulation (with compensations applied, line 1) --- … …(**)
Diff eren. Regulation diff erential for temperature regulation (line 1) --- … …(**)
Aa03 (display
only) Act/Req. Power delivered/Power requested per suction line (line 1) --- % 0 | 0 …100 | 100
Reg. Status Regulation status (according to the type of regulation set, line 1) --- --- Stop | Increase
Decrease
Stand-by
Functioning
Timings | Alarms
Reg. Type Compressor regulation type (line 1) --- --- Proportional Band
Dead Zone
Setpoint Actual suction setpoint (with compensations applied, line 1) --- … …(**)
Aa04 (display
only) C01, C02, …C12 Time remaining for next compressor startup (line 1) --- s 0…32000
C01 Power delivered from compressor 1 of line 1 (a "!" to the right of the value means that some
form of compressor power forcing is active, e.g., safety times, alarms, startup procedure) --- % 0…100
… … … … …
C12 Power delivered from compressor 12 (line 1) --- % 0…100
Aa05 (display
only) Temperature Suction temperature (line 1) --- … …(**)
Superheat. Superheating (line 1) --- … …(**)
Aa11 (display
only) Disch. 1 Discharge temperature compressor 1 (line 1) --- … …(**)
… … … … …
Disch. 6 Discharge temperature compressor 6 (line 1) --- … …(**)
Aa12 (display
only) Oil Temp 1 Oil temperature compressor 1 (line 1) --- … …(**)
… … … … …
Oil Temp 6 Oil temperature compressor 6 (line 1) --- … …(**)
Aa13 (display
only) In.liq.1: DO Digital output number associated and liquid injection/economizer (*) status compressor 1
(line 1) --- … 0…29
… … … … …
In.liq.6: DO Digital output number associated and liquid injection/economizer (*) status compressor 6
(line 1) --- … 0…29
Aa15 (display
only) Discharge temperature Discharge temperature Digital Scroll
TM
compressor (line 1) --- … …(**)
Cap.Reduction Capacity reduction Digital Scroll TM compressor (line 1) in progress NO | YES
Oil sump T. Oil sump temperature Digital Scroll TM compressor (line 1) --- … …(**)
Oil status Oil dilution status Digital Scroll TM compressor (line 1) OK | Diluted
Aa16 (display
only) Status Operational status Digital Scroll
TM
compressor (line 1) --- --- OFF | Start
ON | Alarm
Count Safety time count Digital Scroll
TM
compressor (line 1) --- s 0…999
Compr. Status Digital Scroll
TM
compressor (line 1) --- --- ON | OFF
Valve Status Digital Scroll TM valve (line 1) --- --- ON | OFF
Cap.Req. Capacity requested Digital Scroll TM compressor (line 1) --- % 0…100
ActualCapac. Actual capacity Digital Scroll
TM
compressor (line 1) --- % 0…100
Aa20 (display
only) Pressure Condensing pressure (line 1) --- … …(**)
Sat.Temp. Condensing saturated temperature (line 1) --- … …(**)
ActualSet Actual setpoint for pressure regulation (with compensations applied, line 1) --- … …(**)
Diff eren Regulation diff erential for pressure regulation (line 1) --- … …(**)
Aa21 (display
only) Pressure Condensing pressure (line 1) --- … …(**)
Sat.Temp. Condensing saturated temperature (line 1) --- … …(**)
ActualSet Actual setpoint for temperature regulation (with compensations applied, line 1) --- … …(**)
Diff eren. Regulation diff erential for temperature regulation (line 1) --- … …(**)
Aa22 (display
only) Act/Req Power delivered/Power requested per condensing line (line 1) --- % 0 | 0 …100 | 100
Reg. Status Regulation status (according to the type of regulation set, line 1) --- --- Stop | Increase
Decrease
Stand-by
Functioning
Timings | Alarms
Reg. Type Gas cooler regulation type (line 1) --- --- Proportional Band
Dead Zone
Setpoint Actual setpoint gas cooler (line 1) --- … …(**)
Aa23 (display
only) F1 Power delivered from fan 1 of line 1 (a "!" to the right of the value means that some form of
power forcing is active) --- % 0…100
… … … … …
F8 Power delivered from fan 8 of line 1 (a "!" to the right of the value means that some form of
power forcing is active) --- % 0…100
Aa24 (display
only) F9 Power delivered from fan 9 of line 1 (a "!" to the right of the value means that some form of
power forcing is active) --- % 0…100
… … … … …
F16 Power delivered from fan 16 of line 1 (a "!" to the right of the value means that some form of
power forcing is active) --- % 0…100
Aa25 (display
only) Discharge temperature Discharge temperature (line 1) --- … …(**)
External temperature External temperature (line 1) --- … …(**)
Aa31 (display
only) Pressure Suction pressure (line 2) --- … …(**)
Sat.Temp. Suction saturated temperature (line 2) --- … …(**)
ActualSet Actual setpoint for pressure regulation (with compensations applied, line 2) --- … …(**)
Diff eren. Regulation diff erential for pressure regulation (line 2) --- … …(**)
Aa32 (display
only) Pressure Suction pressure (line 2) --- … …(**)
Sat.Temp. Suction saturated temperature (line 2) --- … …(**)
ActualSet Actual setpoint for temperature regulation (with compensations applied, line 2) --- … …(**)
Diff eren. Regulation diff erential for temperature regulation (line 2) --- … …(**)
Aa33 (display
only) Act/Req. Power delivered/Power requested per suction line (line 2) --- % 0 | 0 …100 | 100
Reg. Status Regulation status (according to the type of regulation set, line 2) --- --- Stop | Increase
Decrease
Stand-by
Functioning
Timings | Alarms
Reg. Type Compressor regulation type (line 2) --- --- Proportional Band
Dead Zone
Setpoint Actual suction setpoint (with compensations applied, line 2) --- … …(**)
Page 103 of 172
Copyright HPL March 2021 P4114S Rev 03