![background image](http://html.mh-extra.com/html/daikin/2mks40g2v1b/2mks40g2v1b_service-manual_501075189.webp)
SiBE12-816_D
SA Indoor Unit - FFQ Series
Operation Manual
178
Operation manual
9
BRC1D528
Remote controller
4PW23717-1
The process described above is now restarted.
NOTE
NOTE
NOTE
NOTE
The
button is used to exit browsing at once
(without having to scroll through all programmed
actions).
Press the
button to enter the browse mode, the
icon appears,
will blink.
Browsing always starts on Monday and
ends on Sunday.
Check the
icon. If at least 1 action is
programmed for Monday, will appear.
The clock indicates the time when the programmed
action is scheduled, either
,
or
and
is being displayed.
The temperatures mentioned above are
for clarifying purposes only, temperature
values on your controller may vary.
If
does not appear, it indicates that there are no
programmed actions for Monday.
Press the
button again to go to the next day of
the week.
will blink, this indicates that the
programmed actions for Tuesday are being browsed.
If at least 1 action is programmed for Tuesday,
will
appear. The clock indicates the time when the
programmed action will be enabled, either
,
or
and
is being displayed.
If
does not appear, it indicates that there are no
programmed actions for Tuesday.
Press the
button to display the next programmed
action. If a second action is programmed for Tuesday,
will still be blinking and
will appear.
Assuming that 5 actions were programmed for
Tuesday, a total of 5 presses will be required to
display all programmed actions.
Continue pressing the
button until the day of the
week indicator displays the current day (not blinking),
you have now quit browsing.
The number of times that the
button
will have to be pressed to quit browsing
depends on the number of programmed
actions in the schedule timer.
How do I interpret the programmed
actions
To be able to understand the behaviour of your
installation when the schedule timer is enabled, it is
important to look at all programmed actions for the
current day and maybe the last programmed action of
yesterday.
If the first programmed action for today is not active
yet, the current status of your installation depends,
most probably but not necessarily, on the last
programmed action from yesterday. Read the
important note below.
If the first programmed action for today is already
active, the current status of your installation depends,
most probably but not necessarily, on the parameters
programmed in the first programmed action for today.
Read the important note below.
To keep the operation of your installation
simple, the schedule timer settings can
easily be overruled by altering the current
setting ("last command" overrules
previous command until next scheduled
command).
Conclusion: Although
is displayed, somebody
might have altered the settings. The next
programmed action will overrule the altered settings
and all settings return as programmed.
Содержание 2MKS40G2V1B
Страница 12: ...SiBE12 816_D 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 180: ...SA Indoor Unit FFQ Series SiBE12 816_D 169 Operation Manual 2 Start 5s 5s 5s 5s 5s End ...
Страница 290: ...Outdoor Unit SiBE12 816_D 279 Removal Procedure 15 Lift and remove the electrical box Step Procedure Points R12537 ...