![background image](http://html.mh-extra.com/html/daikin/2mks40g2v1b/2mks40g2v1b_service-manual_501075153.webp)
SiBE12-816_D
RA Indoor Unit
Operation Manual
142
To use ON TIMER
operation
1. Press “ON TIMER button”.
is displayed.
blinks.
2.
3.
4. Press “CANCEL button”.
To combine ON TIMER and OFF TIMER
ATTENTION
In the following cases, set the timer again.
1, 3
4
2
(Example)
Combined
Press “SELECT button” until
the time setting reaches the
point you like.
Press “ON TIMER button”
again.
To cancel ON TIMER
operation
• Check that the clock is correct. If not, set
the clock to the present time.
• Every pressing of either button
increases or decreases the time setting
by 10 minutes. Holding down either
button changes the setting rapidly.
• The TIMER lamp lights up.
• The TIMER lamp goes off.
• A sample setting for combining the two timers is shown below.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote controller.
Present time: 23:00
(The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00
Содержание 2MKS40G2V1B
Страница 12: ...SiBE12 816_D 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 180: ...SA Indoor Unit FFQ Series SiBE12 816_D 169 Operation Manual 2 Start 5s 5s 5s 5s 5s End ...
Страница 290: ...Outdoor Unit SiBE12 816_D 279 Removal Procedure 15 Lift and remove the electrical box Step Procedure Points R12537 ...