SA Indoor Unit - FFQ Series
SiBE12-816_D
193
Operation Manual
13
English
Number of beeps
3 short beeps ....
1 short beep ......
1 long beep........ Normal state
Press until the indoor unit beeps twice.
1
2
3
4
Reset of the display
5
6
7
Press the INSPECTION/TEST button
to select the inspection mode “
”.
“
” appears on display and blinks. “UNIT”
lights up.
Press PROGRAMMING TIMER
BUTTON and change the unit number.
Press to change the unit number until the
indoor unit beeps and perform the following
operation according to the number of beeps.
Perform all steps from
to .
Perform and
steps.
Press OPERATION MODE SELECTOR
BUTTON
“
” on the left-hand of the malfunction code
blinks.
Press PROGRAMMING TIMER
BUTTON and change the
malfunction code.
Press OPERATION MODE SELECTOR
BUTTON
“
” on the right-hand of the malfunction
code blinks.
Press PROGRAMMING TIMER
BUTTON and change the
malfunction code.
Press until the indoor unit makes a long
beep.
The malfunction code is fixed when the
indoor unit makes a long beep.
Press OPERATION MODE SELECTOR
BUTTON to get the display back to the
normal state.
Содержание 2MKS40G2V1B
Страница 12: ...SiBE12 816_D 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 180: ...SA Indoor Unit FFQ Series SiBE12 816_D 169 Operation Manual 2 Start 5s 5s 5s 5s 5s End ...
Страница 290: ...Outdoor Unit SiBE12 816_D 279 Removal Procedure 15 Lift and remove the electrical box Step Procedure Points R12537 ...