RA Indoor Unit
SiBE12-816_D
133
Operation Manual
FVXS25/35/50FV1B
2. When the flap has reached
the desired position,
press “SWING button ”
once more.
Adjusting the Airflow Direction
1, 2
You can adjust the airflow direction to increase
your comfort.
To adjust the
horizontal blade (flap)
• “ ” is displayed on the LCD and
the flaps will begin to swing.
1. Press “SWING button ”.
• The flap will stop moving.
• “ ” disappears from the LCD.
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the
rightside blades.)
Notes on flap and louvers angle
• Unless “SWING” is selected, you should set the
flap at a near-horizontal angle in HEAT mode
and at a upward position in COOL or DRY mode
to obtain the best performance.
COOL/
DRY
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
ATTENTION
HEAT
Содержание 2MKS40G2V1B
Страница 12: ...SiBE12 816_D 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 180: ...SA Indoor Unit FFQ Series SiBE12 816_D 169 Operation Manual 2 Start 5s 5s 5s 5s 5s End ...
Страница 290: ...Outdoor Unit SiBE12 816_D 279 Removal Procedure 15 Lift and remove the electrical box Step Procedure Points R12537 ...