![background image](http://html.mh-extra.com/html/daikin/2mks40g2v1b/2mks40g2v1b_service-manual_501075043.webp)
SiBE12-816_D
Indoor Unit
Printed Circuit Board Connector Wiring Diagram
32
1. Indoor Unit
1.1
Wall Mounted Type
1.1.1 FTXG25/35EV1BW(S), CTXG50EV1BW(S)
Connectors and
Other Parts
PCB (1): Control PCB
PCB (2): Signal Receiver PCB
PCB (3): INTELLIGENT EYE Sensor PCB
1) S1
Connector for fan motor
2) S21
Connector for centralized control (HA)
3) S32
Indoor heat exchanger thermistor
4) S36
Connector for INTELLIGENT EYE sensor PCB
5) S41
Connector for swing motors
6) S46
Connector for signal receiver PCB
7) S49
Connector for reduction motor (front panel mechanism)
8) S51
Connector for front panel limit switch
9) H1B, H2, H3
Connector for terminal board
10) FG
Terminal for earth
11) JA
Address setting jumper
∗
Refer to page 303 for detail.
JB
Fan speed setting when compressor stops for thermostat OFF
JC
Power failure recovery function (auto-restart)
∗
Refer to page 306 for detail.
12) LED A
LED for service monitor (green)
13) FU (F1U)
Fuse (3.15 A, 250 V)
14) V1
Varistor
1) S47
Connector for control PCB
2) SW1 (S1W)
Forced operation ON/OFF button
3) LED2 (H2P)
LED for INTELLIGENT EYE (green)
4) LED3 (H3P)
LED for timer (yellow)
5) LED4 (H4P)
LED for operation (green)
6) RTH1 (R2T)
Room temperature thermistor
1) S36
Connector for control PCB
Содержание 2MKS40G2V1B
Страница 12: ...SiBE12 816_D 1 List of Functions Part 1 List of Functions 1 Functions 2 1 1 Cooling Only 2 1 2 Heat Pump 5 ...
Страница 180: ...SA Indoor Unit FFQ Series SiBE12 816_D 169 Operation Manual 2 Start 5s 5s 5s 5s 5s End ...
Страница 290: ...Outdoor Unit SiBE12 816_D 279 Removal Procedure 15 Lift and remove the electrical box Step Procedure Points R12537 ...