background image

1

Please observe the following instructions.

1. Operate the Selector Switch to run or stop the unit.

- Do not use Main Power Switch or Auxiliary Power Switch to operate unit.

2. Do not stick anything into the air outlet or inlet.

- It is dangerous and it can cause injury or damage.

3. Avoid exposing your body directly to a continuous cool air flow for long periods.

4. Do not pour water on the unit to clean it.

- It is dangerous and it can cause injury or damage.

Never use solvents or harsh chemicals when cleaning the unit.

When the air inlet grill and cabinet are dirty, wipe with lukewarm water (below 104°F or 40°C)

5. Avoid placing any obstacles near the inlet or outlet.

- If the inlet or outlet is blocked with any obstacle, it may cause damage to the unit.

6. Do not run and stop the unit frequently.

- If you run and stop the unit more than 4-5 times an hour, it can cause damage to the unit.

7. Wait at least 3 minutes before restarting the unit or in the case of power failure. 

- If you turn on the unit within 3 minutes after power off, this can cause damage to the unit.

8. If the air conditioner is operated without an air filter, dust is not removed from the air, and will result in

accumulation of dust. This may lead to failure of unit.

* Do not forget to install the air filter.

9.   The air filter should be cleaned at least once every two weeks.

10. Before cleaning the unit, set the Selector Switch at off position.

- And then unplug the power cord.

11. Never store gasoline or any other flammable liquid near the air conditioner.

- It is very dangerous.

12. Do not force the controls on the front panel too much.

- It can cause damage to the controls and the unit.

13. Set a comfortable temperature.

- Very low temperature settings increase power consumption considerably.

14. Do not remove the plug by pulling on the power cord.

- Will cause damage to the cord and may cause electrical shock.

PRECAUTIONS FOR PROPER USE OF AIR CONDITIONER

Summary of Contents for TAW-8E






















Reviews: