DAELIM S2 125, Руководство по обслуживанию

Страница: 175 / 184

16-6
STARTER SYSTEM
Starter magnetic switch voltage
●
Measure the voltage between the yellow / red wire (+)
and ground at the starter magnetic switch connector.
●
If battery voltage appears only when the starter switch
is pressed, it is normal.
Starter magnetic switch ground line
●
Disconnect the wire connector from the starter
magnetic switch and check for continuity between the
ground wire (green / yellow) and ground.
STARTER MAGNETIC SWITCH
REMOVAL
●
Release the seat lock with the main key.
●
Remove the luggage box.
(
⇨
3-3)
●
Remove the center cover.
(
⇨
3-3)
●
Remove the battery (+) cable from the starter magnetic
switch terminal.
●
Remove the starter motor cable from the starter
magnetic switch terminal.
●
Disconnect the yellow / red connector and green /
yellow connector from the wire harness.
●
Remove the starter magnetic switch from the switch
setting bracket securing the frame.
●
Install in the reverse order of removal.
INSPECTION
●
Check if the starter magnetic switch “clicks” when it is
turned ON.
-
Clicks
→·
Poorly connected battery terminal and
motor terminal of the switch. (Check
the starter magnetic switch)
-
No clicks
→·
No starter magnetic switch input
voltage. (Faulty relay ground line and
starter magnetic switch)
STARTER MAGNETIC SWITCH
WIRE CONNECTOR
BATTERY ⊕ CABLE
STARTER MAGNETIC SWITCH
STARTER MOTOR CABLE
STARTER MAGNETIC SWITCH