DAELIM S2 125, Руководство по обслуживанию

Страница: 101 / 184

9-14
CYLINDER HEAD / VALVE
CAM SHAFT
HOLDER
●
Apply engine oil to the camshaft, and install it on the
cylinder head with the cam thread facing downward.
●
Assemble the cam chain and cam sprocket after
matching the cam sprocket timing mark in parallel
with the top of the cylinder head.
●
Install the dowel pins on the cylinder head.
●
Install the camshaft holder.
●
Remove the pan screws and seals from the cam chain
tensioner lifter.
●
Rotate the tensioner shaft clockwise with a small
driver, and insert the shaft into the body completely.
●
Install the cam cover plate.
●
Apply engine oil to the threaded part; install the
camshaft holder nut and bolts, and tighten them
driving with 2 - 3 times.
TORQUE VALUE : 2.0 kgf
·
m
·
The hole of the camshaft holder and the fitting
section of the rocker arm shaft fit section must be in
alignment.
·
Of IN and EX, the shorter rocker arm should be
installed on the IN side.
·
If the cam chain tensioner lifter is dropped, the shaft
will advance by the spring force.