Chapter 6 Setting your DOT 320 57
Stylus
You can set the sensitivity of LCD screen.
Double-Tap
You can set and check the sensitivity of double-tapping.
To set the double-tap sensitivity:
1. Select Start > Settings > Control Panel.
2. Run Stylus and select Double-tap tab.
3. Double-tap the grid. The color of grid will change.
To test the double-tap sensitivity:
1. Select Start > Settings > Control Panel.
2. Run Stylus and select Double-tap tab.
3. Double-tap the icon below. The icon will change.
4. If the icon doesn’t change, adjust your setting using the grid above.
Calibration
If your DOT 320 is not responding properly to your taps, recalibrate your screen using
Recalibrate.
To start the recalibrate:
1. Select Start > Settings > Control Panel.
2. Run Stylus and select Calibration tab.
3. Tap Recalibrate, then the calibrate process starts.
