manualshive.com logo in svg

D-Link DES-3326SRM, Справочное руководство по интерфейсу командной строки

Скачайте бесплатное руководство пользователя для продукта D-Link DES-3326SRM на manualshive.com. Это руководство поможет вам настроить и использовать ваше устройство без проблем. Необходимая информация всегда под рукой благодаря нашему удобному руководству.

Поделиться
Скачать
background image

iv 

Warranty service may be obtained by contacting a D-Link office within the applicable warranty 
period, and requesting a Return Material Authorization (RMA) number.  If a Registration Card 
for the product in question has not been returned to D-Link, then a proof of purchase (such as 
a copy of the dated purchase invoice) must be provided.  If Purchaser's circumstances require 
special handling of warranty correction, then at the time of requesting RMA number, 
Purchaser may also propose special procedure as may be suitable to the case. 

After an RMA number is issued, the defective product must be packaged securely in the 
original or other suitable shipping package to ensure that it will not be damaged in transit, and 
the RMA number must be prominently marked on the outside of the package.  The package 
must be mailed or otherwise shipped to D-Link with all costs of mailing/shipping/insurance 
prepaid. D-Link shall never be responsible for any software, firmware, information, or memory 
data of Purchaser contained in, stored on, or integrated with any product returned to D-Link 
pursuant to this warranty. 

Any package returned to D-Link without an RMA number will be rejected and shipped back to 
Purchaser at Purchaser's expense, and D-Link reserves the right in such a case to levy a 
reasonable handling charge in addition mailing or shipping costs. 

Software: 

Warranty service for software products may be obtained by contacting a D-Link office within 
the applicable warranty period.  A list of D-Link offices is provided at the back of this manual, 
together with a copy of the Registration Card.  If a Registration Card for the product in 
question has not been returned to a D-Link office, then a proof of purchase (such as a copy of 
the dated purchase invoice) must be provided when requesting warranty service.  The term 
"purchase" in this software warranty refers to the purchase transaction and resulting license to 
use such software. 

D-Link warrants that its software products will perform in substantial conformance with the 
applicable product documentation provided by D-Link with such software product, for a period 
of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller.  D-Link 
warrants the magnetic media, on which D-Link provides its software product, against failure 
during the same warranty period.  This warranty applies to purchased software, and to 
replacement software provided by D-Link pursuant to this warranty, but shall not apply to any 
update or replacement which may be provided for download via the Internet, or to any update 
which may otherwise be provided free of charge. 

D-Link's sole obligation under this software warranty shall be to replace any defective software 
product with product which substantially conforms to D-Link's applicable product 
documentation.  Purchaser assumes responsibility for the selection of appropriate application 
and system/platform software and associated reference materials.  D-Link makes no warranty 
that its software products will work in combination with any hardware, or any application or 
system/platform software product provided by any third party, excepting only such products 
as are expressly represented, in D-Link's applicable product documentation as being 
compatible.  D-Link's obligation under this warranty shall be a reasonable effort to provide 
compatibility, but D-Link shall have no obligation to provide compatibility when there is fault 
in the third-party hardware or software.  D-Link makes no warranty that operation of its 
software products will be uninterrupted or absolutely error-free, and no warranty that all 
defects in the software product, within or without the scope of D-Link's applicable product 
documentation, will be corrected. 

Содержание DES-3326SRM



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3326SRM

La Toulousaine 1400 Installation Manual preview
1400
Бренд: La Toulousaine Страницы: 6
3Com 4007 Release Note preview
4007
Бренд: 3Com Страницы: 128
3Com 4005 Datasheet preview
4005
Бренд: 3Com Страницы: 2
3Com 4200G 12-Port Configuration Manual preview
4200G 12-Port
Бренд: 3Com Страницы: 422
3Com 3CR16708-91 - OfficeConnect Managed Switch 9 Datasheet preview
3CR16708-91 - OfficeConnect Managed Switch 9
Бренд: 3Com Страницы: 4
3Com 3CR13501-73 Release Note preview
3CR13501-73
Бренд: 3Com Страницы: 5
3Com 3CR13500 Software Install Manual preview
3CR13500
Бренд: 3Com Страницы: 30
3Com 5500G SERIES Getting Started Manual preview
5500G SERIES
Бренд: 3Com Страницы: 36
3Com 3CNJ220-CRM Datasheet preview
3CNJ220-CRM
Бренд: 3Com Страницы: 4
3Com Baseline 2226-PWR Plus User Manual preview
Baseline 2226-PWR Plus
Бренд: 3Com Страницы: 77
3Com 3CRWX120695A Reference Manual preview
3CRWX120695A
Бренд: 3Com Страницы: 570
3Com OfficeConnect WX1200 Release Note preview
OfficeConnect WX1200
Бренд: 3Com Страницы: 28
3Com Baseline 2226-PWR Plus Datasheet preview
Baseline 2226-PWR Plus
Бренд: 3Com Страницы: 4
3Com CoreBuilder 6000 Supplementary Manual preview
CoreBuilder 6000
Бренд: 3Com Страницы: 31
echoflex PTM Series Installation Manual preview
PTM Series
Бренд: echoflex Страницы: 8
Qlogic SANbox 5802V Installation Manual preview
SANbox 5802V
Бренд: Qlogic Страницы: 124
Qlogic SANbox 5800V Series User Manual preview
SANbox 5800V Series
Бренд: Qlogic Страницы: 158
Qlogic SANbox 5602 User Manual preview
SANbox 5602
Бренд: Qlogic Страницы: 324

Бренды по названию

Популярные бренды

Загрузить еще бренды