CyberOptics SE505, Руководство по оборудованию

Страница: 24 / 180

Chapter 2 : System Overview
14 SE505 Hardware Manual
SE505 System
The SE505 is an inline Solder Paste Inspection system that inspects solder deposits.
The SE505 helps to prevent production problems by notifying operators when the print process
moves outside the control tolerances. It is also intended to help Process Engineers to establish
process tolerances.
The following pages describe the main components of the SE505 and show their location.
SE505 Unit
The SE505 system controls and indicators are located on the outside of the unit as shown in
Figure 18 and described below.
Table 1. SE505 System Components
Component Description
Air Pressure Gauge The LED gauge, located near the control buttons panel on the outer
frame of the system, displays the air pressure.
Control Buttons The buttons on the front panel control system operation as follows:
● E-Stop : Stops all of the system’s moving parts.
● Green Start : Starts the inspection. This button is an alternative
to using the button in the software.
●
Red Stop : Stops the inspection. This button is an alternative to
using the button in the software.
●
Yellow E-Stop Reset : Initializes the system after re-engaging
the E-Stop.
●
Yellow Alarm Cancel : Clears system alarms. This button is an
alternative to using the button in the software.
Emergency Stop (E-Stop) Stops all of the system’s moving parts.
ESD Grounding Plug For connecting ESD wrist strap to prevent damage from
electrostatic discharge.
Keyboard and Trackball Placed on a tray that is mounted on a pivoting arm attached to the
machine frame which can be folded.
Leveling Feet Adjustable to level the unit.
Monitor 17-inch flat-panel display mounted on a pivoting arm attached to the
machine frame.
Power Switch The power switch removes all power from the system with the
exception of the processor power. The switch can be locked in the
off position to ensure safety from moving parts while servicing the
machine.
Signal-Light Pole Indicates the SE505 system status based on user configuration.