CyberOptics SE505, Руководство по оборудованию

Страница: 14 / 180

Chapter 1 : Safety
4 SE505 Hardware Manual
Lockout SE505
The lockout label is located at the rear of the SE505 above the AC main circuit breaker. Lockout
of the machine is to prevent unexpected energization or startup of machinery and equipment, or
the release of hazardous energy during service or maintenance activities.
➢
To lockout for SE505
1. Turn off all electrical power to the system. For more information, refer to the section
“ Shutting Down the System ” on page 59.
2. Check that the air shut-off valve is turned to the horizontal position, which is the OFF
position.
3. Ensure that all energy sources which could activate the machine must be locked out.
4. Insert a padlocking facility into the slot on the AC main circuit breaker (CB1) located at the
rear of the SE505. (See Step 1 in Figure 2)
5. Push the latch of the padlocking facility down. (See Step 2 in Figure 2)
6. Attach a padlock or a tag to the padlocking facility. (See Step 3 in Figure 2)
Figure 2. Lockout Component
Figure 3. Lockout at the rear of SE505
Caution:
Turn the AC main circuit breaker to OFF to shut down all electrical power to the
SE505 before starting any replacement operations. For more information, refer to the section
“
Shutting Down the System ” on page 59.
1
2
3
Padlocking
Facility
Padlock
Padlocking Facility