CTC Union GSi 600 Series, Руководство по установке и обслуживанию

Страница: 82 / 136

82 CTC GSi 600
12.6 Weekly program
In a weekly program (designated "Program" in the
display menus), the periods can be set for when
a function should be active or inactive during the
weekdays.
The system does not allow certain functions to be
active at the same time according to the same weekly
program; for example, the "Night Reduction" and "Extra
DHW" functions, but most functions can share the same
weekly program. If multiple functions share the same
weekly program, changes to the weekly program of one
function will incur the same changes for other functions
sharing the weekly program.
An "X" is displayed to the right of the weekly program
heading if the same weekly program is shared by
another remotely controlled function.
Click the weekly program heading to see a graphical
overview of when the weekly program is active during
the weekdays.
12.6.1 Defining a weekly program
In this example, a night temperature reduction of heating
circuit 1 (HC1) is programmed.
A weekly program must first be defined in the "Installer/
Define/Remote control" menu.
Set a weekly program (1-20) in the "Program" column in
the "HC1 Night Reduction" row using the arrow keys or
click where the cursor is in the example.
12.6.2 Setting a weekly program
A weekly program can be set for most remotely
controlled functions in the menus under "Installer/
Settings". However, schedules for "Night reduction",
"Extra DHW" and "Ventilation" can only be accessed via
the start menu.
The schedule includes 30 rows and a setting can be
made in each row. For example, in one row you can set
the date and time for the function to activate, and the
time the function should deactivate in the row below.
In the example, "Night reduction" for heating circuit
1 has been set to be "On" from 22:30 to 07:00 on
weekdays, except for weekends (Friday and Saturday
nights). The second row is highlighted green, which
means that row is active at the current time.
Schedule Active
(Active/Inactive/Restore factory settings)
Activate the weekly program by placing it in "Active"
mode. It is also possible to restore factory settings.
Menu: "Installer / Define /Remote Control".
The "HC1 Night Reduction" function is assigned to Weekly
Program #1.
Click on the "Night Reduction" icon in the heating circuit
"Heating/Cooling" menu to set the weekly program.
Weekly schedule "Night reduction".