manualshive.com logo in svg

CTC Union GSi 600 Series, Руководство по установке и обслуживанию

Поделиться
Скачать
CTC Union GSi 600 Series Скачать руководство пользователя страница 20

20

CTC GSi 600 

4.  Important to remember!

Check the following points at the time of delivery and installation:

4.1 

Transportation

Transport the unit to the installation site before removing the packaging. 

Handle the product in the following manner:

•  Forklift.

•  Lifting eye that has been fitted to the lifting sleeve on top of the product 

in the expansion connection.

•  Lifting band around the pallet. 

NB:

 Can only be used with the 

packaging on. 

Remember that the product has a high centre of gravity and should be 

handled with caution.

•  The product must be transported and stored in an upright position.

4.2 

Positioning

•  Remove the packaging and check before installation that the product 

has not been damaged in transit. Report any transport damage to the 

carrier.

•  Place the product on a solid foundation, preferably made of concrete.  

If the product needs to be placed on a soft carpet, base plates 

must be placed under the adjustable feet.

•  Avoid placing the heat pump in rooms where the walls are of 

lightweight design, as people in the adjoining room may be disturbed 

by the compressor and vibrations.

•  Remember to leave a service area of at least 1 metre in front of the 

product.

•  The product must not be placed below floor level either.

4.3 

Recycling

•  The packaging must be deposited at a recycling station or with the 

installation engineer for correct waste management.

•  Obsolete products must be disposed of correctly and transported to a 

waste station or distributor/retailer offering this service. 

Disposal of the product as household waste is not permitted.

•  It is very important that the product’s refrigerant, compressor oil and 

electric/electronic components are disposed of correctly.

4.4 

After commissioning

•  The installation engineer advises the property owner on the design and 

servicing of the system.

•  The installation engineer fills in a checklist and contact information – 

the customer and installation engineer sign the list, which the customer 

keeps.

•  Register the product for warranty and insurance via the website 

https://ctc.se/kundservice#garantiregistrering 

https://www.ctc-heating.com/customer-service#warranty-registration

Содержание GSi 600 Series









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды