CTC Union GSi 600 Series Скачать руководство пользователя страница 80

Страница: 80 / 136

CTC GSi 600

12.3.3 Night reduction in

temperature

When "Holiday Reduction" is activated, hot water production is
stopped. The "Temporary extra DHW" feature is also stopped.

Night reduction means lowering the indoor temperature,

either via remote control or during scheduled periods.

In the menu "HC Night reduction" menu, the periods

during the week for night temperature reduction can be

scheduled.

The value by which the temperature is lowered during

the period is set in one of the following menus:

Room sensor installed

"Installer/Settings/Heating circuit/Room temp. lowered

Night reduction °C".

Room sensor not installed

"Installer/Settings/Heating circuit/Primary sensor

lowered Night reduction °C".

The set temperature reduction also applies when using

a remote control for night reduction.

The "Night reduction" icon in the "Heating/Cooling"

menu only appears if a "Weekly Program" has been

defi ned for the heating circuit.

For more information, refer to:

• chapter "Weekly Program" for schedule setting.

• section "Def. Remote Control" of the

"Installer / Defi ne" chapter for defi ning the remote

control function.

12.3.4 Holiday

You use this option to set the number of days that you

want the set temperature to be consecutively reduced.

For example, if you want to go on holiday.

The value by which the temperature is lowered during

the period is set in one of the following menus:

Room sensor installed

• "Installer/Settings/Heating circuit/Room

temperature lowered Holiday °C".

Room sensor not installed

• "Installer/Settings/Heating circuit/Primary fl ow

lowered Holiday °C".

Holiday reduction is enabled from the time of setting

(press the plus (+) symbol).

Up to 300 days can be set.

The weekly program has been set for "Night Reduction" to
be active weekdays between 22:30 and 07:00, except during
the night between Friday and Saturday and the night between
Saturday and Sunday (when no night reduction occurs).

Содержание GSi 600 Series









































































































































Результаты поиска

Содержание GSi 600 Series

Отзывы:

Бренды по названию

Популярные бренды

CTC Union GSi 600 Series, Руководство по установке и обслуживанию

Результаты поиска

Содержание GSi 600 Series

Отзывы:

Бренды по названию

Популярные бренды