CSZ EZT-570S, Руководство пользователя

Страница: 48 / 155

EZT-570S User Manual
48
4.4 Monitoring Automated Ramp/Soak Program Operation
The Program Status view provides all status information regarding the operation of the current
program. It can be accessed directly from the home Program menu.
Figure 4-13 Program Status
Status indicates the current program operating mode, i.e., active, hold, ramp, soak, waiting, etc.
Start indicates the date and time at which the program was started.
End is the calculated stop date and time for the program.
Step indicates the step number currently being executed.
Time is the time remaining in the current step.
Wait indicates the input(s) being monitored if a wait for condition is present.
Wait SP shows the set point or digital input number for the wait for condition if active.
Jump indicates the step number that program will jump to at the completion of the current step.
Cycles indicates the number of jumps remaining for the step (if any).
The
loop set points for the current step can be viewed at the top of the screen by pressing the left
and right scroll buttons to cycle through each loop. Note that the set points shown here are the target
set points, not the actual set points the loops are controlling to. To view the actual control set point,
see the Main loop view or Overview screen.
4.4.1 Advance Previous/Next Step
The advance step functions allow you to skip certain program steps or repeat them by advancing to
the desired step. To advance to a previous or next step in the program, it must first be put into hold.
Once the program is in hold, the advance step buttons on the Program Status screen will be enabled.
By selecting “Previous Step” or “Next Step”, the program will jump back or jump forward by one step
each time the menu item is selected. When the program is on the desired step, place it back into run
and the program will resume operation from the beginning of the step.