CSZ EZT-570S, Руководство пользователя

Страница: 38 / 155

EZT-570S User Manual
38
Once the “Enter” button is pressed, the time length of the step will be automatically calculated in order
to achieve the desired ramp rate and will be shown in the step data list view along with the set point
and the specified ramp rate.
The ramp rate entry is fixed in units/minute with a range of 0.0 to 99.9. When the ramp rate entry is
zero (or left blank), the EZT-570S simply enters the new set point.
R amp rate can only be entered on one loop per step since the program operates on a single
time base. In order to set the ramp rate (and subsequent time length for the step) to a
different loop, you must clear an existing ramp rate entry.
Entering step time will clear any existing ramp rate entry on the step. Ramp rate is a function
of time and difference in set point, so the length of time for the step can be entered or a ramp
rate can be entered, not both.
When entering ramp rate, on temperature for example, it sets a length of time for the step
based on the ramp rate and set point entered. If another set point is different from the
previous step, humidity for example, the humidity set point will also ramp to the humidity set
point for the step. However, the actual ramp rate for humidity will be based on the difference
in set point from the previous step and the time length of the step. It will not be equal to the
ramp rate for temperature.