CSZ EZT-570S, Руководство пользователя, Страница: 35 / 155

EZT-570S User Manual
35
4.1 Entering a Ramp/Soak Program
Ramp/Soak programs are created and edited from the Program Entry screen. To create an
automatic ramp/soak program:
1. On the Program Entry screen, press the File menu button, select “New” to create a new program.
2. Enter the data for step 1 of the program.
The first step of a program is an “initialization” step meaning that the loop set points will
immediately go to the set points entered for the step and stay there for the duration of
the step when the program is started. This insures that the program will always start
from the same conditions each time it is run.
3. For each additional step required, press the Insert button to add a step. Make any required
changes to the step time, set points, events and wait for conditions.
4. Once entry is complete, press the File menu button and select “Save” to save the program.
Programs can be saved with names of up to 16 characters long. However, the EZT-
570S only uses the first 10 characters of the program name for display updates and
record keeping. When naming programs, try to keep the name limited to 10 characters
in order to have the full program name shown, or use the first 10 characters as a means
of more clearly identifying the program if more than 10 characters are used in the name.
Figure 4-1 Program Entry