CSZ EZT-570S, Руководство пользователя

Страница: 47 / 155

EZT-570S User Manual
47
Once the desired start step number is entered, press the “Start” button. The program will then be
transferred to the control module’s memory and then started once the transfer is complete. The
Program Operation screen will then be automatically closed.
If the program was set up with the auto start feature enabled, the program will enter the auto
start mode immediately upon start. Once the set date or day and time are reached, the
program will begin running. The start date shown on the Program Status screen indicates
when the program will start based on the auto start settings.
If you run the current program that is already loaded, you will not be prompted to select the start step.
The program will automatically be started from step 1. This provides simple start/stop operation when
repeating the same program for multiple tests. If you wish to start the program on a different step,
first select the program by pressing the “Select” button and choosing the program from the list of
available programs. Then press the “Run” button. You will then be prompted to enter the start step
prior to the program being reloaded and run.
To stop
a program, select “Stop” or “Off” from the Program Operation window. When a program is
stopped, the loops will return to single set point (static mode) operation.
The
Stop selection stops the running program, but leaves the set points and events at their current
values when the program stops. This allows you to stop a program and continue running the
chamber in manual mode.
The
Off selection stops the running program and turns all events off. The set points will remain at
their current values when the program is stopped; however, all events will be turned off. This allows
you to immediately stop a program and shut down the chamber with a single selection.
4.3.1 Hold/Resume Ramp/Soak Program Operation
At any time during the operation of a program, it can be manually placed into hold. This stops the
program timer; however, the chamber continues operation under the current step settings at the time
the program was put into hold. To pause a program select “Hold” from the Program Operation
window. To resume the program from the point in which it paused, select “Run”.
When a program is in hold, the set points and events can be manually changed; however,
once program operation is resumed, the set points and event status will return to those
defined by the program step.