RESTORE_DEFAULT_ALL
[12h]
Send
Restores PMBus settings that were stored using RESTORE_DEFAULT_ALL.
This command is automatically performed at power up.
Display format
: -
Initial setting
: -
Range of setting and reading
: -
Note1: While power supply works, the command is invalid. The output needs to be disabled.
Note2: During command execution ( 100ms ), it isn't possible to do the start-up power supply.
Note3: It starts up after the execution ends.
STORE_USER_ALL
[15h]
Send
The Operating Memory data is written to the EEPROM
Display format
: -
Initial setting
: -
Range of setting and reading
: -
Note1: To avoid the risk of the data damage, during STORE_USER_ALL [ 15h ] command is implemented,
a delay of 3 seconds should be allowed while the device is busy before the next command is
transmitted to this device.
Note2: During STORE_USER_ALL [ 15h ] command execution, it isn't possible to communicate with PMBus.
Note3: It is possible to rewrite up to 1000 times.
Applications manual
For CHS300/400/500-
I
series
- 28 -
