Cosel CHS series, Руководство по связи

Страница: 46 / 56

STATUS_BYTE [78h] R/W Byte
This command returns an abbreviated status for fast reads.
Display format : -
Initial setting : 00 h
Range of setting and reading : -
STATUS_WORD [79h] R/W Word
This command returns the general status information used to indicate subsequent
status to be read for more detail.
Display format : -
Initial setting : 00 h
Range of setting and reading : -
1
2
3
4
5
6
7
8
9
7
8
#
bit4
bit0
bit14
bit11
bit8
bit2 0 STATUS_TEMPERATURE Either of [ 7Dh ] sets at 1.
bit1 0 STATUS_CML Either of [ 7Eh ] sets at 1.
1
2
3
4
5
6
# bit Value Overview
bit7 0 It sets when the device can not reply in use.
bit6 0 It sets by output OFF status
bit5 0 It sets by VOUT_OV_FAULT_LIMIT [ 40h ]
bit3 0 It sets by VIN_UV_FAULT_LIMIT [ 59h ]
0 It sets by IOUT_OC_FAULT_LIMIT [ 4Ah ] ( not supported )
0 It sets in the error, the warning except bit7-1.
bit Value Overview
bit15 0 STATUS_VOUT Either of [ 7Ah ] sets at 1.
0 STATUS_IOUT Either of [ 7Bh ] sets at 1.
bit13 0 STATUS_INPUT [ 7Ch ] sets at 1.
bit12 0 STATUS_MFR_SPECIFIC It sets in either of [ 80h ]. ( not supported )
0 It sets in the range that the output voltage is Power_Good.
bit10 0 STATUS_FUNS [ 81h ], It sets in either of [ 82h ]. ( not supported )
bit9 0 STATUS_OTHER It sets in either of [ 7Fh ]. ( not supported )
0
It sets when detecting the malfunction which doesn't apply to bit15-1. ( not supported )
bit7-0 - STATUS_BYTE It becomes the contents which are the same as [ 78h ].
Applications manual
For CHS300/400/500-
I
series
- 45 -