Control Network Solution eNodeIVTM Скачать руководство пользователя

Страница: 46 / 76

September 2011

V1.44

709.1 packets received

: This is the total number of packets received in from Side A (709.1) by

the router since the statistics were cleared. In Bridging mode this provides the total number of

IP 852 packets received in from Side A.

709.1 packets sent

: This is the total number of packets sent out to Side A (709.1) by the router

since the statistics were cleared. In Bridging mode this provides the total number of IP 852

packets sent out to Side A.

IP packets received

: This is the total number of 852 packets received in from Side B (IP) by the

router since the statistics were cleared. This total includes both all the 852 data packets and the

852 configuration (management) packets.

IP packets sent

: This is the total number of 852 packets sent out to Side B (IP) by the router

since the statistics were cleared. This total includes both all the 852 data packets and all the

852 configuration (management) packets.

852 Data packets received

: This is the total number of 852 Data packets only received in from

Side B (IP) by the router since the statistics were cleared.

852 Data packets sent

: This is the total number of 852 Data packets only sent out to Side B (IP)

by the router since the statistics were cleared.

852 Management packets received

: This is the total number of 852 Management packets only

received in from Side B (IP) by the router since the statistics were cleared.

852 Management packets sent

: This is the total number of 852 Management packets only sent

out to Side B (IP) by the router since the statistics were cleared.

Update Stats

: This button updates the statistics and refreshes the display.

Clear Stats

: This button zeros out the statistics, restarts the statistics time counter and

refreshes the display.

Bootup Log

: This list shows the last ten dates and times that the eNodeIV device has been reset

or power cycled. The first column labelled Power Loss Time shows the time the device was

powered off or reset. The second column labelled BootUp time shows the time the device

rebooted. If the times are identical then the device was reset not power cycled. If the times are

different the difference is the length of time the device lost power.

Clear Boot Log

: This button clears the boot up log and sets all the times and dates to zeros.

Содержание eNodeIVTM










































































Результаты поиска

Содержание eNodeIVTM

Отзывы:

Похожие инструкции для eNodeIVTM

Бренды по названию

Популярные бренды

Control Network Solution eNodeIVTM, Руководство пользователя

Результаты поиска

Содержание eNodeIVTM

Отзывы:

Похожие инструкции для eNodeIVTM

Бренды по названию

Популярные бренды