Control Network Solution eNodeIVTM Скачать руководство пользователя

Страница: 75 / 76

September 2011

V1.44

6. Firmware Upgrade Instructions

The eNodeIV device's firmware can be upgraded using ftp over the IP interface. This feature

allows eNodeIV device users to take advantage of enhancements and features that may

become available in the future. For more information on this contact Control Network Solutions

Ltd in the first instance.
For example at the time of this writing the latest version release of the application firmware is

version 4.14.011 and the corresponding firmware filenames are GR4_4_14_011_eth_image.bin

for the Ethernet version and GR4_4_14_011_wifi_image.bin for the WiFi version. Likewise the

latest release version of the bootloader is 4.12.048.C for Ethernet with corresponding filename

GR4_4_048_C_eth_rom.bin. Moreover the latest release version of the bootloader for WiFi is

4.12.053.D with corresponding filename GR4_4_048_C_wifi_rom.bin.

7. Contact Details

Control Network Solutions Ltd

Studio 7, Intec 2, Intec Business Park Wade Road,
BASINGSTOKE, Hampshire, RG24 8NE, England
Tel: +44 (0) 1256 818700
Fax: +44 (0) 1256 812520
Email:

Web:

This document, the associated software, and the associated online documentation are the

property of Adept Systems, Inc. and Control network Solutions Ltd and are loaned to the user

under the terms of the End User License Agreement. No title to or ownership of the software

described in this document or any of its parts is transferred to customers. No part of this

document may be reproduced or transmitted in any form or by any means without the express

written permission of Adept Systems, Inc. or Control Network Solutions Ltd. Unauthorized

copying or use of the software or any associated materials is contrary to the property rights of

Adept Systems, Inc. and is a violation of state and federal law. This material must be returned

to Adept Systems or Control Network Solutions upon demand.

Содержание eNodeIVTM










































































Результаты поиска

Содержание eNodeIVTM

Отзывы:

Похожие инструкции для eNodeIVTM

Бренды по названию

Популярные бренды

Control Network Solution eNodeIVTM, Руководство пользователя

Результаты поиска

Содержание eNodeIVTM

Отзывы:

Похожие инструкции для eNodeIVTM

Бренды по названию

Популярные бренды