O p e r a t i o n l
4 - 7 1
4
Opera
tion
S e t u p S c r e e n s
( c o n t i n u e d )
Advanced:
This button will present a popup window where additional less frequently used
parameters can be set.
Set:
The network settings can only be saved when all changes have been completed. This
button will save the changes made to the configuration parameters.
The advanced IP Address settings are:
Protocol
The system supports remote communications using a variety of protocols. Some of these
protocols use the built in TCP/IP port of the touch-panel, while others may require the addi-
tion of hardware. Multiple protocols can operate simultaneously over the touch-panels TCP
port. Some remote protocols will require an unlock code to enable. This page will configure
and setup the various protocols and required hardware.
All remote protocol parameters will require a security level of {Service} to modify. Once a
protocol is enabled, or any protocol settings have been changed, the system will perform a
reboot sequence upon returning to the <Home> screen. When the reboot sequence is com-
pleted, the protocol will become available.
The protocols that can work over the Ethernet port include: ModbusTCP, EtherNetIP, and
OPC Server. The Ethernet port is always available on the touch panel for usage. The IP
addressing of the touch-panel is configured on the <IP Address> setup page. The OPC
Server and EtherNetIP protocols will require an unlock code to enable. The Modbus TCP
does not require an unlock code.
The Profibus protocol requires the addition of special hardware in order to function.
Contact a Conair representative if the protocol is to be implemented.
Parameter
Default
Range
Security
Description
NodeID
1
[1:15]
Service/Stop
The Node ID is a unique number assigned to the touch-
screen. This is used with the self-loading option and
TrueWeigh systems to identify the remote blenders.
HostName
trueblend
[15 char string] Service/Stop
The Ethernet hostname of the touchpanel.
(Continued)
Содержание TrueBlend SB-4
