Conair TrueBlend SB-4, Руководство пользователя, Страница: 60 / 168

4 - 2 2 l O p e r a t i o n
O p e r a t i n g S c r e e n s
( c o n t i n u e d )
•
Shift Inventory Report : This report shows the current
shift totals and the percentage of each ingredient as con-
sumed over the shift. Note that if the shift totals are not
cleared at the beginning of the shift then these initial val-
ues will be added to the prior shift totals.
•
Total Inventory Report : This report shows the current
inventory totals and the percentage of teach ingredient as
consumed since the last time the inventory totals were
cleared.
•
Order Report : This report shows the total amount of
material usage for each ingredient for the current
order/job.
•
Resin Report : If resin codes are enabled this report will be available. This report out-
puts a list of all resins maintained by the system including the total amount of material
processed by each resin.
•
Loading Report : If self-loading is enabled, this report becomes available. This report
lists maintenance data for each configured pump and loader in the system.
To generate an on demand report:
1
In the (On Demand) section, select the type of report to be generated from the pull-
down menu.
2
Select the format of the report output from the pull-down menu. Either a formatted
report output with data properly column aligned, or a comma separated file format where
each data value is separated by a comma.
3
Select the report destination. The report destination pull-down will update with the
output options based on what hardware is currently available. The system will show the
available drive space for the destination selected. If the space exceeds 4 Gigabytes, the
value shown will be ‘>4Gb’.
4
A default report name is populated into the (Report Name) field. This report name (15
characters) can be changed. Take care when specifying the file extension.
5
Press the [Run Report] button to generate the report. When complete the report will
be shown in a Report View popup window.
Run Report : Execute or Run the report as specified by the selected data filters. The
progress bar will show the progress of the report. Upon completion of the report, the output
will be presented in a ‘Report Viewer’ popup window.
(Continued)