330ft HDMI DIGITAL EXTENDER
ARD-1008RX
Quick Start Guide
• HDMI signal transmission distances of up to 330ft(100m) at 4K(UHD 3840 x 2160) resolution.
• Supports 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i HDMI signal input.
• Using single CAT6 cable to extend digital signal, low- cost, faster transmission rate and smaller attenuation.
• Supports video, audio, control, Ethernet and power extending together.
• Supports the touch screen and keyboard/mouse signal transmission
• No software is required, easy installation, supports hot-plug and RS-232 full-duplex.
• HDCP2.2 compliant and support EDID communication.
• Supports a PC, SUN, MAC or other media devices with HDMI video.
• Multi-platform support: Windows 2000/XP/Vista/Server 2000/2003/2008, Solaris, Linux, FreeBSD, and
MAC OS 9/10.
• Built-in lightning & surge protection, super interference rejection.
3
4
5
6
8
7
1
2
No.
Connector
Description
1
HDMI OUT
HDMI video signal output to display.
2
RJ45 LAN
For network connection, connect to network device .
3
LED indicators Power indicator: Lights in green- the unit is powered on.
Link indicator: Lights in green-the network connection works well.
4
USB2.0 port Connect to a PC via USB cable(for inputting touch/keyboard/mouse signal etc.)
5
RS-232 Out RS-232 signal(Touch signal) output to Touch screen display.
6
IR Remote
control(In/Out) Connect to a IR receiver for remote control on the display.
7 Remote IN(PoE) Connect ARD-1007TX for transmitting all signals via CAT-5/5e/6 LAN cable.
8
Reserved
Reserved 5V DC Power input connector
In order to meet a degree of protection, the ARD-1008RX HDMI digital extender receiver has to be installed
in a protection enclosure.To mount it, you will require the mounting screws found in the accessory box.
Step3.
Use a screwdriver to tighten the four screws, make sure that the ARD-1008RX is correctly and
securely situated into the enclosure.
Step2.
Take the cover on the enclosure, and align the screw holes on the enclosure with the screw holes on
the cover.
Step1.
Place and firmly fix the ARD-1008RX extender receiver into the protection enclosure.
In order to correctly install the ARD-1008RX, the specific dimensions for the ARD-1008RX are indicated in
the diagram below.
HDMI
cable
HDMI
cable
RS232 cable
HDMI cable
USB cable
Before connecting the ARD-1008RX extender receiver, you should prepare Arista ARD-1007 Local Host(ARD-1007TX)
in hand, then please follow the instructions below to do the connections.
1. Connect the HDMI cable and RS-232 cable(touch signal) between the ARD-1007TX and your PC(BOX
PC-138G) for HDMI signal input.
2. Connect the PC and the ARD-1007TX(USB Host connector) via USB cable for controlling by mouse and
keyboard on the touch display screen.
3. Connect the display monitor and the ARD-1007TX(HDMI Loop Out connector) by HDMI cable.
4. Connect one end of the Cat5e/Cat6 cable to the Local Out connector of ARD-1007TX, and connect the other
end to the Remote In port at the rear of the ARD-1008RX.
5. Connect the HDMI cable and RS-232 cable between the ARD-1008RX and the touch display for HDMI
signal and touch signal output.
6. Insert a USB device on the ARD-1008RX if you have USB connection between the PC and ARD-1007TX.
7. Connect one end of the supplied power adapter to DC48V power connector of the ARD-1007TX, and
connect the other end to the wall AC outlet.
8. If you require network connection, connect the LAN1_HUB_LAN2 port on the ARD-1007TX to a Router
and connect the LAN port on the ARD-1008RX to your desired network device.
9. If you require remote control, insert Remote control connector terminal into the IR Remote control(In/Out)
connector on the ARD-1007TX and ARD-1008RX both.
2
Product overview
1
Features
3
Installation
4
Connections
Power cable
AC outlet
Cat5e/Cat6 cable
Display
monitor
Router
BOX PC
Touch display
Mouse
ARD-1007TX
ARD-1008RX
Screws
ARD-1008RX
Protection
enclosure
Enclosure cover
116.0mm
4.57"
114.3mm
4.50"
36.5mm
1.44"
31.0mm
1.22"
91.6mm
3.61"
