38
PC104 RocketPort Option
Port Monitor Variables
All Port Monitor calculations are saved at program exit and on the hour in a
binary file named
calcs.dat
. This enables you to halt Port Monitor execution
without losing accumulated data.
Port Monitor also creates a
\REPORTS
directory. All hourly and daily reports are
saved in this directory, under the following names:
•
hall.txt
— hourly single report
•
dall.txt
— daily single report
•
hcomx.txt
— hourly multiple reports, where
x
is the port number
•
dcomx.txt
— daily multiple reports, where
x
is the port numb
Compact flash technology does not support an unlimited number of
writes. Use the compact flash to store applications but avoid using it
for file storage. If your application generates files, save the files on a
remote system.
Some safeguards are built into the program to avoid filling up a hard disk drive
due to growing report files. The monitoring program stops writing additional data
to the multiple reports if they reach a size of 2 MB. Also, the program will not
write out data files to the disk drive if the spare room on the drive is less than 2
MB in size.
To view or edit an hourly or daily report, use the Edit Report option on the File
menu, or use a system tool such as NOTEPAD.
For more information, see the Port Monitor
Help
file.
Port Monitor
Variables
The following table lists Port Monitor variables.
Caution
Variable
Description
Open
Open status, on if open, off if closed.
Cts
Input CTS pin status.
Dsr
Input DSR pin status.
Cd
Input CD (carrier detect) pin status.
Rts
Output RTS pin status.
Dtr
Output DTR pin status.
TxTotal
Total bytes transmitted.
RxTotal
Total bytes received.
TxCPSInst
Instantaneous average of transmit characters per second.
RxCPSInst
Instantaneous average of receive characters per second.
Errors
Total hardware receive errors (parity, framing, and overruns.)
TxMinCPS
Last minute average of transmit characters per second.
RxMinCPS
Last minute average of receive characters per second.
TxCPSMinAvMax
Peak TxCPSInst for the last minute.
RxCPSMinAvMax
Peak RxCPSInst for the last minute.
TxCPSHourAvMax
Peak TxMinCPS for the last hour.
RxCPSHourAvMax
Peak RxMinCPS for the last hour.
TxCPSDayAvMax
Peak TxMinCPS for the last day.
RxCPSDayAvMax
Peak RxMinCPS for the last day.
TxTotalRaw
Total number of transmit bytes raw data from driver.
RxTotalRaw
Total number of receive bytes raw data from driver.
TxMinCnt
Count of transmit bytes sent in last minute.
TxHourCnt
Transmit bytes count sent in the last hour.
Содержание DeviceMaster ATS-XPE
