Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 83 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Front Panel Operation 6–19 MN-LBC-4000
6.3.6.3.1.2 (FIRMWARE:) INFO

IMAGE#1/#2
Where ‘#X’ denotes the IMAGE#1 or IMAGE#2 firmware load, the IMAGE#1 and IMAGE#2
firmware load info screens are nested as follows:
IMAGE#X: Bulk APP FPGA
Use the [

][

] arrow keys to select Bulk , App , or FPGA . Press [ENT] .
(FIRMWARE:) INFO

IMAGE#1/#2

BULK
Bulk#X: FW-0020503
X
. X . X MM/DD/YY
(FIRMWARE:) INFO

IMAGE#1/#2

APP
App#X: FW-0020504
X
. X . X MM/DD/YY
(FIRMWARE:) INFO

IMAGE#1/#2

FPGA
FPGA#X: FW-0020505
X
. X . X MM/DD/YY
6.3.6.3.2 (FIRMWARE:) SELECT
Current Active Image: #1
Next Reboot Image: #1 #2
Use this submenu to select the Current Active Firmware Image. The read-only top line shows the
Current Active Image .
On the bottom line: U
se
the
[

][

]
arrow keys to select #1 or #2 as the Next Reboot Image (i.e.,
the image that will be active the next time the unit is rebooted). Press [ENT] .
If the image that you select is already set as the designated Next Reboot Image, this message
displays:
THAT IMAGE IS ALREADY
CURRENT
. NO CHANGE MADE .
You may repeat the task by instead selecting the alternate image.