Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 81 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Front Panel Operation 6–17 MN-LBC-4000
Once the number of faults reaches 100, the 100 th fault displays as “ ER .” The stored faults remain
in memory until you execute the CLEAR-ALL command.
Press [ENT] or [CLR] to return to the previous menu.
6.3.5.2.2 (FAULTS:) STORED

CLEAR-ALL
Clear All Stored Faults
No Yes
Use the [

][

] arrow keys to select No or Yes. Press [ENT] .
When you select Yes , the unit clears the faults log and returns you to the previous menu.
However, if there are faults present on the unit at this time, the unit will re-stamp the faults and
generate new log entries.
6.3.6 (SELECT:) UTILITY Menu Branch
TIME DISP FIRMWARE AID
LAMPTEST RELAY SCRSAVER
Use the
[

][

]
arrow keys to move the cursor to the desired choice. Press [ENT] . The function of
each UTILITY submenu is as follows:
•
TIME Submenu – This allows configuration of the Real-Time Clock.
•
DISP Submenu – This allows adjustment of the VFD brightness level.
•
FIRMWARE Submenus – This allows you to review and select for bootup one of two
installed firmware images.
•
AID Submenu – This allows you to create a unit label.
•
LAMPTEST Submenu – This executes a diagnostic test of the front panel LEDs and VFD.
•
RELAY Submenu – This allows you to set the Fault Relay Logic as Normal or Inverted.
•
SCRSAVER Submenu – This allows you to set one of five different screen saver
behaviors.
6.3.6.1 (UTILITY:) TIME (Real-Time Clock) Submenu
This function follows Military time format (00 to 24 hours).
Edit Real-Time Clock:
HH:MM:SS MM/DD/YY
Edit the time and date settings of the real-time clock. Use the
[

][

]
arrow keys to select a digit
to edit, and then use the
[

][

]
arrow keys to change its value. Press [ENT] .