Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 58 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Firmware Update 5–10 MN-LBC-4000
o
Click [Save] to download the EXE file to your Downloads folder. Once
the download is complete the dialogue prompts you to either [Run] the
self-extracting file, or to open or view the Windows Downloads folder for
further action.
•
For ZIP files:
o
Click [Open] to open the archive file. Use the WinZip features to select
the files for extraction to your destination folder.
o
Click [Save] to download the ZIP file to your Windows Downloads folder.
Once the download is complete the dialogue prompts you to either
[Open] the archive file, or to open or view the Windows Downloads
folder for further action.
8. If not already done with File Download > Open , you must extract, at a minimum, these
files (filenames are subject to change):
•
FW-0020503x_LBC4000_Ethernet_#.#.#.bin – The Firmware Bulk image file
•
LBC-4000/-STReleaseNotes_v#-#-#.pdf – The Firmware Release Notes PDF file
•
CReflash.exe –The Firmware Update Utility program
‘x’ is the firmware revision letter, and ‘#-#-#’ is the firmware version
(e.g., FW Ver. 1.2.5)
9. Confirm availability of the firmware files in the temporary folder. There are several ways
you can view the contents of the temporary folder on a Windows-based PC:
•
To use the Windows Desktop, see Section 5.3.1.1.
•
To use Windows Command-line or Command Prompt, see Section 5.3.1.2.
After you confirm the firmware files are in the folder, proceed to Section 5.4 to upload the
firmware update to the LBC-4000/-ST.