Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 124 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Serial Interface Operation 8–14 MN-LBC-4000
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Select Boot
Image
IMG_ 1 byte, numeric,
1 or 2
Command or Query.
Set or return the firmware image to boot from at startup.
Set or return in the form IMG_x where:
x=1 (Bulk Image 1) or
x=2 (Bulk Image 2)
IMG_
IMG_
IMG_x
Management IP
Address
IPA_ 18 bytes,
numeric
Command or Query.
Set or return the Management IP Address for the ’10/100
ETHERNET’ port.
Set or return in the form IPA_aaa.bbb.ccc.ddd.yy where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
yy=network prefix (08-30)
IPA_
IPA_
IPA_aaa.bbb.c
cc.ddd.yy
Gateway IP
Address
IPG_ 15 bytes,
numeric
Command or Query.
Set or return the Gateway IP Address for the ’10/100 ETHERNET’
port.
Set or return in the form IPG_aaa.bbb.ccc.ddd where:
aaa.bbb.ccc.ddd=IP Address where:
aaa=0-223
bbb=0-255
ccc=0-255
ddd=0-255
IPG_
IPG_ IPG_aaa.bbb.
ccc.ddd