Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 120 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Serial Interface Operation 8–10 MN-LBC-4000
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Concise
Configuration
Status
N/A 52 bytes,
numeric
Query only.
Use “CCS” to return a summarized version of the RCS query.
Returns status info in the form
“CCS_aaaaa.aaabb.bbcd.defffff.fffgg.gghi.ijklmnnnopqqqqrs{cr}{lf}”
where:
aaaaa.aaa=Conv A frequency in MHz
bb.bb=Conv A attenuation in dB
c=Conv A mute state (0=unmuted, 1=muted)
d.d=Conv A slope adjustment level
e=Conv A online/offline (redundancy)
fffff.fff=Conv B frequency in MHz
gg.gg=Conv B attenuation in dB
h=Conv B mute state (0=unmuted, 1=muted)
i.i=Conv B slope adjustment level
j=Conv B online/offline (redundancy)
k=Converter redundancy mode
l=auto fault recovery (1=auto, 0=manual)
m=External Ref present (0=none, 1=present)
nnn=Internal Ref Osc adjustment level (000-255)
o=remote mode (1=remote, 0=local)
p=remote interface (0=EIA-232, 1=EIA-485)
qqqq=remote address (0001-9999)
r=remote baud rate (0=38400, 1=19200, 2=9600, 3=4800,
4=2400, 5=1200)
s=remote data format (0=8N1, 1=7E2, 2=7O2)
N/A
CCS_
CCS_a…s