Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 123 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Serial Interface Operation 8–13 MN-LBC-4000
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII
numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to
Query
(Target to
Controller)
Fault Relay
Logic
FRL_ 1 byte, numeric Command or Query.
Use “FRL” to set or return the fault relay logic.
Set or return info in the form FRL_x where:
x=0 (Normal Logic)
x=1 (Inverted Logic)
FRL_
FRL_ FRL_x
Retrieve
Firmware
Number
N/A 0 bytes
Query only.
For use with current (Ethernet-ready) versions of the LBC-4000/-ST.
Returns the firmware information for the unit.
Returns the current unit firmware info in the form:
“Boot: {cr}
FW-0020506;X.X.X;mm/dd/yy{cr}
Bulk1: {cr}
FW-0020503; X.X.X;mm/dd/yy{cr}
FW-0020504; X.X.X;mm/dd/yy{cr}
FW-0020505; X.X.X;mm/dd/yy{cr}
Bulk2: {cr}
FW-0020503; X.X.X;mm/dd/yy{cr}
FW-0020504; X.X.X;mm/dd/yy{cr}
FW-0020505; X.X.X;mm/dd/yy{cr}{lf}”
where:
X.X.X is the Firmware Version Number, and
mm/dd/yy is the release date.
N/A
FRM_
FRM_x...x
Retrieve
Legacy
Firmware
Number
N/A 0 bytes
Query only.
For use with legacy (non-Ethernet) versions of the LBC-4000.
Returns the firmware information for the unit.
Returns the legacy unit firmware info in the form:
“BULK=FW/9965X{cr}
M&C=FW/9966X{cr}
FPGA=FW/9967X{cr}{lf}”
where:
‘X’ denotes the Firmware Revision Letter)
N/A
FRW_
FRW_x