Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 33 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Installation and Startup 3–5 MN-LBC-4000
3.2.1 Rear Support Brackets Kit (Optional)
Feature Description
1 Back of unit
2 Rack Enclosure Threaded Rear Mounting Rail (typical)
Item
Kit / Quantity
CEFD P/N Description
KT/6228-2 KT/6228-3
1 2 2 HW/10-32SHLDR Shoulder Screw, #10
2 4 4 HW/10-32FLT Flat Washer, #10
3 2 2 HW/10-32SPLIT Lock Washer, #10
4 2 2 HW/10-32HEXNUT Hex Nut, #10
5 4 4 HW/10-32x1/2RK Bolt, #10, Rear Support Bracket
6
2 – FP/6138-2 Bracket, Rear Support (4”)
– 2 FP/6138-3 Bracket, Rear Support (10”)
Figure 3-3. Install the Optional Rear-Mounting Support Brackets Kit
Tools needed to install the optional KT/6228-2 (4”) or KT/6228-3 (10”) Brackets Kit:
•
A medium Phillips

screwdriver
•
A 5/32-inch SAE Allen

Wrench
•
An adjustable Crescent

wrench.
Do these steps to install the brackets kit (Figure 3-3):
1. Use the #10 flat washers, #10 split washers, and #10 hex nut to secure the #10 shoulder
screws to the unit chassis through the rear right and left side mounting slots as shown.
2. Mount the Rear Support Brackets to the rack enclosure threaded rear mounting rails
using the #10 Rear Support Bracket Bolts.
3. Slide the unit into the front of the rack enclosure. Make sure that the #10 Shoulder
Screws properly engage into the slots of the Rear Support Brackets.