Comtech EF Data LBC-4000, Инструкция по установке и эксплуатации

Страница: 109 / 148

LBC-4000 L-Band Up/Down Converter System
Revision 6
Ethernet Interface Operation 7–23 MN-LBC-4000
Typical for all STATUS columns, when any operating parameter is within acceptable limits, the
STATUS indicates
OK within a green box. If a fault condition exists, the message changes to
FAULT within a red box.
Summary
Click [Refresh] to update screen.
Name Description
Parameter STatus Product identification (i.e., CID/AID, serial and model numbers), active firmware,
software image information, and other operational configuration information is
provided here.
Converter A / B Status This section identifies the converter installed in each module slot (BUC or BDC) and
each module’s associated RF conversion band and frequency, attenuation value,
mute status, and online/offline status.
Converter A / B, PS (Power
Supply) A / B, Monitor and
Status
This section provides the current monitored value for each module (BUC or BDC),
including the RF/IF lockout status, operating voltages and temperatures. The
operating voltages for each power supply are also provided.
Notes:
1. Valid Converter A/Converter B LNA Current readings are provided only if the pertinent
LBC-4000/-ST Block Down Converter (BDC) is optionally configured with an LNA. These
parameters otherwise display as
N/A if the pertinent converter is a BUC.
2. Valid Converter A/Converter B Forward RF Power readings are provided only if the
pertinent LBC-4000/-ST Block Up Converter (BUC) is optionally configured with the
Power Monitor feature. These parameters otherwise display as
N/A if the pertinent
converter is a BDC.
3. Valid Power Supply 2 and Local Switch Position information is provided with redundant
configurations only.