Comtech EF Data CDM-425, Инструкция по установке и эксплуатации

Страница: 81 / 744

CDM-425 Advanced Satellite Modem
Revision 0
Rear Panel Connectors and Pinouts 3–9 MN-CDM-425
3.2.2.2.2 Aux G.703 (DB-9F)
The Auxiliary G.703 connector is a 9-pin Type ‘D’ female connector. When
used with Quad E1 operations, this connector serves Ports 3 and 4 of the
Quad E1 interface.
Table 3-4. Auxiliary G.703 Connector Pinouts
(R>L)
Pin #
Signal Function
Serial G.703
Signal Function
Quad D&I
5 Tx in (+) Port 3 Tx in (+)
9 Tx in (-) Port 3 Tx in (–)
4 – Port 3 Rx Out (+)
8 – Port 3 Rx Out (–)
3
GND
GND
7 – Port 4 Tx in (+)
2 – Port 4 Tx in (–)
6 Rx Out (+) Port 4 Rx Out (+)
1 Rx Out (–) Port 4 Rx Out (–)
3.2.2.2.3 Quad E1 Operation via the Balanced G.703 / Aux G.703
Connectors
Each adapter cable option provides for two of the four ports of the Quad E1
interface. If all four ports of Quad E1 are needed, the user will need to obtain a
quantity of (2X) of any adapter option.
For Quad E1 operation, optional Comtech EF Data cabling accessories may be purchased from
Comtech EF Data to adapt the Balanced G.703 or Auxiliary G.703 connectors as follows:
Table 3-5. Data Cabling Accessories
Figure CEFD Part No. Converts (1) 9-pin Type ‘D’ Connector (DB-9F) to:
3-5 CA-0000163 (2) DB-15F connections – see Table 3-6 for the connector pinout
3-6 CA-0000164 (2) RJ-48 F connections – see Table 3-7 for the connector pinout
3-7
KT-0000122 or
KT-0020570
(2) BNC 75Ω BNC-F connections – see Table 3-9 for the connector pinout